Enhanced performance of ambient-air processed CsPbBr₃ perovskite light-emitting electrochemical cells via synergistic incorporation of dual additives

Metal halide perovskite light-emitting electrochemical cells (MHP-LECs) are promising due to their facile solution processability and exceptional optoelectrical properties. However, commercialization is hindered by poor thin-film coverage and the need for glovebox processing. This study addresses these issues by incorporating poly(ethylene oxide) (PEO) and potassium hexafluorophosphate (KPF₆) into cesium lead bromide perovskite (CsPbBr₃) emitting layers (EML), processed under ambient-air conditions. These perovskite composite thin films were spin-coated on a preheated substrate, and the device structure was ITO/PEDOT:PSS/EML/Al. Notably, the MHP-LEC based on CsPbBr₃:PEO:KPF₆ (100:65:0.2, weight ratio) exhibited pure-green emission with a peak at 524 nm and a narrow full width at half-maximum of 27 nm. Compared to a reference device (CsPbBr₃:PEO (100:65, weight ratio)), the new device showed 1.5-, 4-, and 5-fold improvements in current density, electroluminescence (EL) intensity, and lifetime, respectively. These enhancements are attributed to reduced non-radiative current leakage, improved film surface coverage and passivation, and balanced charge carrier injection and transportation. This study offers a straightforward approach for processing CsPbBr₃ thin films under ambient-air conditions, enhancing the EL performance of MHP-LECs.