Find Research outputs

Search results

• 3D SPH Modeling of Heterogeneous Materials Failure under Dynamic loads

  Ma, G., Yi, X. & Wang, X., 2013, 3D SPH Modeling of Heterogeneous Materials Failure under Dynamic loads. Switzerland: Trans Tech Publications, Vol. 535-536. p. 553-556

  Research output: Chapter in Book/Conference paper › Conference paper

• A beetle antennae search improved BP neural network model for predicting multi-factor-based gas explosion pressures

  Xu, Y., Huang, Y. & Ma, G., May 2020, In : Journal of Loss Prevention in the Process Industries. 65, 104117.

  Research output: Contribution to journal › Article

  • Coleoptera
  • Back-propagation Neural Network
  • Neural Networks (Computer)
  • Explosions
  • explosions
  2 Citations (Scopus)

• Access Design of GFRP-reinforced rectangular concrete columns under eccentric axial loading

  Elchalakani, M., Ma, G., Aslani, F. & Duan, W., 9 May 2017, In : Magazine of Concrete Research. 69, 17, p. 865-877 13 p., 1600437.

  Research output: Contribution to journal › Article

  • fiberglass
  • Glass fibers
  • Polymers
  • Concretes
  • Reinforcement
  26 Citations (Scopus)

• A constrained Delaunay discretization method for adaptively meshing highly discontinuous geological media

  Wang, Y., Ma, G., Ren, F. & Li, T., 1 Dec 2017, In : Computers and Geosciences. 109, p. 134-148 15 p.

  Research output: Contribution to journal › Article

  • Mesh generation
  • triangulation
  • fracture network
  • method
  • Boreholes
  27 Citations (Scopus)

• A coupled time integration algorithm for discontinuous deformation analysis using the numerical manifold method

  Qu, X., Ma, G., Qi, C., Dyskin, A. V. & Xia, C., 10 Jun 2020, In : International Journal for Numerical and Analytical Methods in Geomechanics. 44, 8, p. 1145-1169 25 p.

  Research output: Contribution to journal › Article

  • numerical method
  • Computational efficiency
  • Rocks
  • rock
  • analysis

• A critical review of preparation design and workability measurement of concrete material for largescale 3D printing

  Ma, G. & Wang, L., 30 Aug 2017, In : Frontiers of Structural and Civil Engineering. p. 1-19 19 p.

  Research output: Contribution to journal › Article

  • Printing
  • Concretes
  • Flowing wells
  • Concrete mixtures
  • 3D printers
  41 Citations (Scopus)

• Advancements in electromagnetic interference shielding cementitious composites

  Wanasinghe, D., Aslani, F., Ma, G. & Habibi, D., 20 Jan 2020, In : Construction and Building Materials. 231, 117116.

  Research output: Contribution to journal › Review article

  • Signal interference
  • Shielding
  • Composite materials
  • Electromagnetic waves
  • Detonation
  8 Citations (Scopus)

• A hybrid intelligent system for designing optimal proportions of recycled aggregate concrete

  Zhang, J., Huang, Y., Aslani, F., Ma, G. & Nener, B., 10 Nov 2020, In : Journal of Cleaner Production. 273, 122922.

  Research output: Contribution to journal › Article

  • Intelligent Systems
  • Concrete aggregates
  • Intelligent systems
  • Proportion
  • Artificial intelligence
  8 Citations (Scopus)

• A mesh mapping method for simulating stress-dependent permeability of three-dimensional discrete fracture networks in rocks

  Ma, G., Wang, Y., Li, T. & Chen, Y., 1 Apr 2019, In : Computers and Geotechnics. 108, p. 95-106 12 p.

  Research output: Contribution to journal › Article

  • mapping method
  • fracture network
  • Rocks
  • Hydraulics
  • permeability
  7 Citations (Scopus)

• A meso-scale analysis method for the simulation of nonlinear damage and failure behavior of reinforced concrete members

  Du, X., Jin, L. & Ma, G., 2013, In : International Journal of Damage Mechanics. 22, 6, p. 878-904

  Research output: Contribution to journal › Article

  • Reinforced concrete
  • Concretes
  • Mechanical properties
  • Macros
  • Steel
  53 Citations (Scopus)

• A metaheuristic-optimized multi-output model for predicting multiple properties of pervious concrete

  Zhang, J., Huang, Y., Ma, G., Sun, J. & Nener, B., 20 Jul 2020, In : Construction and Building Materials. 249, 118803.

  Research output: Contribution to journal › Article

  • Concretes
  • Hydraulic conductivity
  • Compressive strength
  • Antennas
  • Runoff
  11 Citations (Scopus)

• An enriched K-means clustering method for grouping fractures with meliorated initial centers

  Ma, G., Xu, Z. H., Zhang, W. & Li, S. C., 2015, In : Arabian Journal of Geosciences. 8, 4, p. 1881-1893

  Research output: Contribution to journal › Article

  • geological mapping
  • method
  • literature
  • index
  • analysis
  13 Citations (Scopus)

• A new contact method using multi-sphere covers for 3D Discontinuous Deformation Analysis

  Zhu, H. H., Wu, W., Zhuang, X. Y. & Ma, G., 2013, Proceedings of the 11th International Conference on Analysis of Discontinuous, ICADD11. Great Britain: CRC Press/Balkema, Vol. 2013. p. 263-268

  Research output: Chapter in Book/Conference paper › Conference paper

  2 Citations (Scopus)

• An explicit version of the numerical manifold method and its applications

  Ma, G. & Qu, X. L., 2013, Proceedings of the 11th International Conference on Analysis of Discontinuous Deformation, ICADD11. Great Britain: CRC Press/Balkema, Vol. 2013. p. 315-321

  Research output: Chapter in Book/Conference paper › Conference paper

• An extended edge-based smoothed discrete shear gap method for free vibration analysis of cracked Reissner–Mindlin plate

  Yang, G., Hu, D., Han, X. & Ma, G., 1 Nov 2017, In : Applied Mathematical Modelling. 51, p. 477-504 28 p.

  Research output: Contribution to journal › Article

  • Vibration Analysis
  • Free Vibration
  • Vibration analysis
  • Smoothing
  • Derivatives
  7 Citations (Scopus)

• Application of carbon dioxide as working fluid in geothermal development considering a complex fractured system

  Chen, Y., Ma, G., Wang, H., Li, T. & Wang, Y., 15 Jan 2019, In : Energy Conversion and Management. 180, p. 1055-1067 13 p.

  Research output: Contribution to journal › Article

  • Carbon dioxide
  • Large scale systems
  • Fluids
  • Hot Temperature
  • Pipe
  22 Citations (Scopus)

• A practical nonprobabilistic reliability assessment method on key strata shear failure in Longwall Mining

  Luan, H., Wang, J., Ma, G. & Zhang, K., 2015, In : Mathematical Problems in Engineering. 2015, p. 893019

  Research output: Contribution to journal › Article

  Open Access

  • Reliability Assessment
  • Longwall mining
  • Mining
  • China
  • Roofs
  2 Citations (Scopus)

• A review on effects of different factors on gas explosions in underground structures

  Xu, Y., Huang, Y. & Ma, G., Dec 2020, In : Underground Space (China). 5, 4, p. 298-314 17 p.

  Research output: Contribution to journal › Article

  Open Access

  • Underground structures
  • explosion
  • Explosions
  • Gases
  • gas
  4 Citations (Scopus)

• A Semi-Continuum Model for Numerical Simulations of Mass Transport in 3-D Fractured Rock Masses

  Ma, G., Li, T., Wang, Y. & Chen, Y., 26 Aug 2019, In : Rock Mechanics and Rock Engineering.

  Research output: Contribution to journal › Article

  • mass transport
  • Mass transfer
  • Rocks
  • Computer simulation
  • rock

• Assessment of underground tunnel stability to adjacent tunnel explosion

  Li, J., Li, H., Ma, G. & Zhou, Y. X., 2013, In : Tunnelling and Underground Space Technology. 35, p. 227-234

  Research output: Contribution to journal › Article

  • explosion
  • Explosions
  • tunnel
  • Tunnels
  • particle
  55 Citations (Scopus)

• A three-dimensional thermo-hydro-mechanical coupled model for enhanced geothermal systems (EGS) embedded with discrete fracture networks

  Wang, Y., Li, T., Chen, Y. & Ma, G., 1 Nov 2019, In : Computer Methods in Applied Mechanics and Engineering. 356, p. 465-489 25 p.

  Research output: Contribution to journal › Article

  • Embedded systems
  • fluid pressure
  • Geothermal energy
  • Fluids
  • sensitivity analysis
  4 Citations (Scopus)

• A unified pipe-network-based numerical manifold method for simulating immiscible two-phase flow in geological media

  Ma, G. W., Wang, H. D., Fan, L. F. & Chen, Y., Jan 2019, In : Journal of Hydrology. 568, p. 119-134 16 p.

  Research output: Contribution to journal › Article
  8 Citations (Scopus)

• Boundary Element based Discontinuous Deformation Analysis

  Fu, G. Y., Ma, G. W. & Qu, X. L., 1 May 2017, In : International Journal for Numerical and Analytical Methods in Geomechanics. 41, 7, p. 994-1015 22 p.

  Research output: Contribution to journal › Article

  • Insulator Elements
  • bis(p-chlorophenyl)acetic acid
  • Digital differential analyzers
  • toppling
  • analysis
  10 Citations (Scopus)

• Centroid sliding pyramid method for removability and stability analysis of fractured hard rock

  Wu, W., Zhuang, X., Zhu, H., Liu, X. & Ma, G., 1 Jun 2017, In : Acta Geotechnica. 12, 3, p. 627-644 18 p.

  Research output: Contribution to journal › Article

  • hard rock
  • stability analysis
  • sliding
  • Rocks
  • Cones
  9 Citations (Scopus)

• Comparisons between centrifuge and numerical modeling results for slope toppling failure

  Chen, Z. Y., Gong, W. J., Ma, G., Wang, J., He, L., Xing, Y. C. & Xing, J. Y., 2015, In : Science China Technological Sciences. 58, 9, p. 1497-1508

  Research output: Contribution to journal › Article

  • Centrifuges
  • Rocks
  • Finite difference method
  • Computer simulation
  • Failure modes
  19 Citations (Scopus)

• Compressive behaviour of fibre-reinforced cemented paste backfill

  Yi, X., Ma, G. & Fourie, A., 2015, In : Geotextiles and Geomembranes. 43, 3, p. 207-215

  Research output: Contribution to journal › Article

  • backfill
  • Ointments
  • fiber
  • Fibers
  • Tailings
  69 Citations (Scopus)

• Confidence-based quantitative risk analysis for offshore accidental hydrocarbon release events

  Huang, Y., Ma, G., Li, J. & Hao, H., 2015, In : Journal of Loss Prevention in the Process Industries. 35, p. 117-124

  Research output: Contribution to journal › Article

  • Risk Analysis
  • quantitative risk assessment
  • Hydrocarbons
  • Risk analysis
  • Fuzzy numbers
  6 Citations (Scopus)

• Coupled time domain integration algorithm for numerical manifold method

  Qu, X., Ma, G. & Fu, G., 1 May 2017, In : International Journal of Geomechanics. 17, 5, E4016005.

  Research output: Contribution to journal › Article

  • numerical method
  • stability analysis
  • Computational efficiency
  • rocks
  • Rocks
  3 Citations (Scopus)

• Crack extension process and failure behavior of marbles containing fillers

  Dong, Q. Q., Ma, G., Xia, M. J. & Zhen, H. B., 2015, In : Beijing Gongye Daxue Xuebao/Journal of Beijing University of Technology. 41, 9, p. 1375-1382

  Research output: Contribution to journal › Article

  • Marble
  • Fillers
  • Rocks
  • Cracks
  • Cements
  1 Citation (Scopus)

• Design of Metal Foam Cladding Subjected to Close-Range Blast

  Zhou, H., Ma, G., Li, J. & Zhao, Z., 2015, In : Journal of Performance of Constructed Facilities. 29, 4, p. 04014110-1 - 04014110-11

  Research output: Contribution to journal › Article

  • Metal foams
  • Foams
  • Explosions
  • Membranes
  • Plastics
  11 Citations (Scopus)

• Determination of Young's modulus of jet grouted coalcretes using an intelligent model

  Sun, Y., Zhang, J., Li, G., Ma, G., Huang, Y., Sun, J., Wang, Y. & Nener, B., 26 Mar 2019, In : Engineering Geology. 252, p. 43-53 11 p.

  Research output: Contribution to journal › Article

  • Young modulus
  • beetle
  • antenna
  • Elastic moduli
  • support vector machine
  40 Citations (Scopus)

• Development of three-dimensional numerical manifold method for jointed rock slope stability analysis

  He, L., An, X., Ma, G. & Zhao, Z., 2013, In : International Journal of Rock Mechanics and Mining Sciences. 64, p. 22-35

  Research output: Contribution to journal › Article

  • Slope stability
  • slope stability
  • stability analysis
  • numerical method
  • Rocks
  46 Citations (Scopus)

• Different damage parameters on failure properties with non-straight marble under uniaxial compression

  Qianqian, D., Guowei, M., Qiusheng, W., Mingjie, X., Hebin, Z. & Qiaoyan, L., 2015, In : Electronic Journal of Geotechnical Engineering. 20, 14, p. 6151-6167

  Research output: Contribution to journal › Article

  • Marble
  • marble
  • fissure
  • Compaction
  • compression
  1 Citation (Scopus)

• Discontinuous deformation analysis in rock mechanics practice

  Hatzor, Y. H., Ma, G. & Shi, G. H., 20 Jul 2017, The Netherlands: CRC Press/Balkema. 410 p. (ISRM Book Series; vol. 5)

  Research output: Book/Report › Book

  • Rock mechanics
  • Rocks
  8 Citations (Scopus)

• Dual reciprocity boundary element based block model for discontinuous deformation analysis

  Fu, G., Ma, G. & Qu, X., 2015, In : Science China Technological Sciences. 58, 9, p. 1575-1586

  Research output: Contribution to journal › Article

  • Insulator Elements
  • Boundary element method
  • Convergence of numerical methods
  • Formability
  • Dynamic analysis
  2 Citations (Scopus)

• Dynamic material model of annealed soda-lime glass

  Zhang, X., Hao, H. & Ma, G., Mar 2015, In : International Journal of Impact Engineering. 77, p. 108-119 12 p.

  Research output: Contribution to journal › Article

  • Lime
  • Glass
  • Strain rate
  • Equations of state
  • Blasting
  40 Citations (Scopus)

• Effect of water to cement ratio, fly ash, and slag on the electromagnetic shielding effectiveness of mortar

  Wanasinghe, D., Aslani, F. & Ma, G., 30 Sep 2020, In : Construction and Building Materials. 256, 119409.

  Research output: Contribution to journal › Article

  • Coal Ash
  • Electromagnetic shielding
  • Fly ash
  • Mortar
  • Slags
  1 Citation (Scopus)

• Effects of capillary pressures on two-phase flow of immiscible carbon dioxide enhanced oil recovery in fractured media

  Wang, H. D., Chen, Y. & Ma, G. W., 1 Jan 2020, In : Energy. 190, 116445.

  Research output: Contribution to journal › Article

  • Carbon Dioxide
  • fractured medium
  • Capillarity
  • Enhanced recovery
  • Two-phase Flow

• Efficiency and Accuracy Verification of the Explicit Numerical Manifold Method for Dynamic Problems

  Qu, X., Wang, Y., Fu, G. & Ma, G., 2015, In : Rock Mechanics and Rock Engineering. 48, 3, p. 1131-1142

  Research output: Contribution to journal › Article

  • Wave propagation
  • numerical method
  • Computational efficiency
  • Rocks
  • wave propagation
  19 Citations (Scopus)

• Electromagnetic shielding properties of carbon fibre reinforced cementitious composites

  Wanasinghe, D., Aslani, F. & Ma, G., 10 Nov 2020, In : Construction and Building Materials. 260, 120439.

  Research output: Contribution to journal › Article

  • Electromagnetic shielding
  • Carbon Fiber
  • Carbon fibers
  • Signal interference
  • Shielding

• Electromagnetic wave absorbing performance of 3D printed wave-shape copper solid cementitious element

  Sun, J., Huang, Y., Aslani, F. & Ma, G., Nov 2020, In : Cement and Concrete Composites. 114, 103789.

  Research output: Contribution to journal › Article

  • Electromagnetic waves
  • Copper
  • Electromagnetic wave reflection
  • Pollution
  • Printing
  1 Citation (Scopus)

• Energy absorption of graded foam subjected to blast: A theoretical approach

  Zhou, H., Wang, Y., Wang, X., Zhao, Z. & Ma, G., 2015, In : Materials and Design. 84, p. 351-358

  Research output: Contribution to journal › Article

  • Energy absorption
  • Foams
  • Crushing
  • Plastics
  10 Citations (Scopus)

• Equivalent discrete fracture network method for numerical estimation of deformability in complexly fractured rock masses

  Ma, G., Li, M., Wang, H. & Chen, Y., Nov 2020, In : Engineering Geology. 277, 105784.

  Research output: Contribution to journal › Article

  • fracture network
  • Formability
  • Rocks
  • rock
  • elastic modulus

• Equivalent discrete fracture networks for modelling fluid flow in highly fractured rock mass

  Ren, F., Ma, G., Fan, L., Wang, Y. & Zhu, H., 7 Nov 2017, In : Engineering Geology. 229, p. 21-30 10 p.

  Research output: Contribution to journal › Article

  • fracture network
  • Flow of fluids
  • fluid flow
  • Rocks
  • rock
  27 Citations (Scopus)

• Evaluation of equivalent medium methods for stress wave propagation in jointed rock mass

  Ma, G., Fan, L. & Li, J., 2013, In : International Journal for Numerical and Analytical Methods in Geomechanics. 37, 7, p. 701-715

  Research output: Contribution to journal › Article

  • Wave propagation
  • wave propagation
  • Rocks
  • rock
  • evaluation
  26 Citations (Scopus)

• Evaluation of gas explosion overpressures at configurations with irregularly arranged obstacles

  Li, J., Ma, G., Abdel-Jawad, M. & Hao, H., 2015, In : Journal of Performance of Constructed Facilities. 29, 5, p. B4014003-1 - B4014003-8

  Research output: Contribution to journal › Article

  • Explosions
  • Computational fluid dynamics
  • Geometry
  • Gases
  • Engineers
  4 Citations (Scopus)

• Evaluation of geothermal development considering proppant embedment in hydraulic fractures

  Chen, Y., Wang, H., Li, T., Wang, Y., Ren, F. & Ma, G., 1 Jun 2020, In : Renewable Energy. 153, p. 985-997 13 p.

  Research output: Contribution to journal › Article

  • Proppants
  • Hydraulics
  • Hot Temperature
  • Thermal energy
  • Embedded systems
  1 Citation (Scopus)

• Experimental investigation and modeling of viscoelastic behavior of concrete

  Fan, L., Wong, L. N. Y. & Ma, G., 2013, In : Construction and Building Materials. 48, p. 814-821

  Research output: Contribution to journal › Article

  • Concretes
  • Wave propagation
  • Pendulums
  • Elastic moduli
  25 Citations (Scopus)

• Experimental study on mechanical properties of sandstone specimens containing a single hole after high-temperature exposure

  Yin, Q., Jing, H. W. & Ma, G., 2015, In : Geotechnique Letters. 5, January-March, p. 43-48

  Research output: Contribution to journal › Article

  • Sandstone
  • mechanical property
  • experimental study
  • crack
  • sandstone
  11 Citations (Scopus)

• Experimental study on the traditional timber mortise-tenon joints

  Li, X., Zhao, J., Ma, G. & Huang, S., 2015, In : Advances in structural engineering. 18, 12, p. 2089-2102

  Research output: Contribution to journal › Article

  • Timber
  • Bending moments
  • Wood
  • Stiffness
  • Mechanical properties
  15 Citations (Scopus)