Find Research Outputs

Search results

• 13th International conference on steel, space and composite structures: volume of abstracts

  Aslani, F. (ed.), Ma, G. (ed.) & Uy, B. (ed.), 2018.

  Research output: Contribution to conference › Other

• 3D crack propagation by the numerical manifold method

  Yang, S., Cao, M., Ren, X., Ma, G., Zhang, J. & Wang, H., 1 Jan 2018, In : Computers and Structures. 194, p. 116-129 14 p.

  Research output: Contribution to journal › Article

  • Numerical Manifold Method
  • Crack Propagation
  • Gravity dams
  • Concrete dams
  • Crack propagation
  15 Citations (Scopus)

• 3D SPH Modeling of Heterogeneous Materials Failure under Dynamic loads

  Ma, G., Yi, X. & Wang, X., 2013, 3D SPH Modeling of Heterogeneous Materials Failure under Dynamic loads. Switzerland: Trans Tech Publications, Vol. 535-536. p. 553-556

  Research output: Chapter in Book/Conference paper › Conference paper

• A beetle antennae search improved BP neural network model for predicting multi-factor-based gas explosion pressures

  Xu, Y., Huang, Y. & Ma, G., May 2020, In : Journal of Loss Prevention in the Process Industries. 65, 104117.

  Research output: Contribution to journal › Article

  • Coleoptera
  • Back-propagation Neural Network
  • Neural Networks (Computer)
  • Explosions
  • explosions
  2 Citations (Scopus)

• Access Design of GFRP-reinforced rectangular concrete columns under eccentric axial loading

  Elchalakani, M., Ma, G., Aslani, F. & Duan, W., 9 May 2017, In : Magazine of Concrete Research. 69, 17, p. 865-877 13 p., 1600437.

  Research output: Contribution to journal › Article

  • fiberglass
  • Glass fibers
  • Polymers
  • Concretes
  • Reinforcement
  23 Citations (Scopus)

• A constrained Delaunay discretization method for adaptively meshing highly discontinuous geological media

  Wang, Y., Ma, G., Ren, F. & Li, T., 1 Dec 2017, In : Computers and Geosciences. 109, p. 134-148 15 p.

  Research output: Contribution to journal › Article

  • Mesh generation
  • triangulation
  • fracture network
  • method
  • Boreholes
  27 Citations (Scopus)

• A coupled time integration algorithm for discontinuous deformation analysis using the numerical manifold method

  Qu, X., Ma, G., Qi, C., Dyskin, A. V. & Xia, C., 10 Jun 2020, In : International Journal for Numerical and Analytical Methods in Geomechanics. 44, 8, p. 1145-1169 25 p.

  Research output: Contribution to journal › Article

  • numerical method
  • Computational efficiency
  • Rocks
  • rock
  • analysis

• A critical review of preparation design and workability measurement of concrete material for largescale 3D printing

  Ma, G. & Wang, L., 30 Aug 2017, In : Frontiers of Structural and Civil Engineering. p. 1-19 19 p.

  Research output: Contribution to journal › Article

  • Printing
  • Concretes
  • Flowing wells
  • Concrete mixtures
  • 3D printers
  41 Citations (Scopus)

• Advancements in electromagnetic interference shielding cementitious composites

  Wanasinghe, D., Aslani, F., Ma, G. & Habibi, D., 20 Jan 2020, In : Construction and Building Materials. 231, 117116.

  Research output: Contribution to journal › Review article

  • Signal interference
  • Shielding
  • Composite materials
  • Electromagnetic waves
  • Detonation
  6 Citations (Scopus)

• A grid-based risk screening method for fire and explosion events of hydrogen refuelling stations

  Huang, Y. & Ma, G., 4 Jan 2018, In : International Journal of Hydrogen Energy. 43, 1, p. 442-454 13 p.

  Research output: Contribution to journal › Article

  • refueling
  • stations
  • Explosions
  • Screening
  • explosions
  11 Citations (Scopus)

• A hybrid intelligent system for designing optimal proportions of recycled aggregate concrete

  Zhang, J., Huang, Y., Aslani, F., Ma, G. & Nener, B., 10 Nov 2020, In : Journal of Cleaner Production. 273, 122922.

  Research output: Contribution to journal › Article

  • Intelligent Systems
  • Concrete aggregates
  • Intelligent systems
  • Proportion
  • Artificial intelligence
  6 Citations (Scopus)

• A hybrid method for improved stability prediction in construction projects: A case study of stope hangingwall stability

  Qi, C., Fourie, A., Ma, G. & Tang, X., 1 Oct 2018, In : Applied Soft Computing Journal. 71, p. 649-658 10 p.

  Research output: Contribution to journal › Article

  • Classifiers
  • Learning algorithms
  • Machine learning
  • Supervised learning
  • Artificial intelligence
  23 Citations (Scopus)

• A meso-scale analysis method for the simulation of nonlinear damage and failure behavior of reinforced concrete members

  Du, X., Jin, L. & Ma, G., 2013, In : International Journal of Damage Mechanics. 22, 6, p. 878-904

  Research output: Contribution to journal › Article

  • Reinforced concrete
  • Concretes
  • Mechanical properties
  • Macros
  • Steel
  53 Citations (Scopus)

• A metaheuristic-optimized multi-output model for predicting multiple properties of pervious concrete

  Zhang, J., Huang, Y., Ma, G., Sun, J. & Nener, B., 20 Jul 2020, In : Construction and Building Materials. 249, 118803.

  Research output: Contribution to journal › Article

  • Concretes
  • Hydraulic conductivity
  • Compressive strength
  • Antennas
  • Runoff
  8 Citations (Scopus)

• Analysis of Stochastic Seismic Wave Interaction with a Slippery Rock Fault

  Li, J. C., Ma, G. & Zhao, J. A., 2011, In : Rock Mechanics and Rock Engineering. 44, 1, p. 85-92

  Research output: Contribution to journal › Article

  • Seismic waves
  • seismic wave
  • Rocks
  • S-wave
  • Wave propagation
  34 Citations (Scopus)

• An enriched K-means clustering method for grouping fractures with meliorated initial centers

  Ma, G., Xu, Z. H., Zhang, W. & Li, S. C., 2015, In : Arabian Journal of Geosciences. 8, 4, p. 1881-1893

  Research output: Contribution to journal › Article

  • geological mapping
  • method
  • literature
  • index
  • analysis
  13 Citations (Scopus)

• A new contact method using multi-sphere covers for 3D Discontinuous Deformation Analysis

  Zhu, H. H., Wu, W., Zhuang, X. Y. & Ma, G., 2013, Proceedings of the 11th International Conference on Analysis of Discontinuous, ICADD11. Great Britain: CRC Press/Balkema, Vol. 2013. p. 263-268

  Research output: Chapter in Book/Conference paper › Conference paper

  2 Citations (Scopus)

• A new way to treat material discontinuities in the numerical manifold method

  An, X. M., Ma, G., Cai, Y. C. & Zhu, H. H., 2011, In : Computer Methods in Applied Mechanics and Engineering. 200, p. 3296–3308

  Research output: Contribution to journal › Article
  50 Citations (Scopus)

• An explicit version of the numerical manifold method and its applications

  Ma, G. & Qu, X. L., 2013, Proceedings of the 11th International Conference on Analysis of Discontinuous Deformation, ICADD11. Great Britain: CRC Press/Balkema, Vol. 2013. p. 315-321

  Research output: Chapter in Book/Conference paper › Conference paper

• An extended displacement discontinuity method for analysis of stress wave propagation in viscoelastic rock mass

  Fan, L. F., Ren, F. & Ma, G., 2011, In : Journal of Rock Mechanics and Geotechnical Engineering. 3, 1, p. 73-81

  Research output: Contribution to journal › Article

  Open Access
  33 Citations (Scopus)

• An extended edge-based smoothed discrete shear gap method for free vibration analysis of cracked Reissner–Mindlin plate

  Yang, G., Hu, D., Han, X. & Ma, G., 1 Nov 2017, In : Applied Mathematical Modelling. 51, p. 477-504 28 p.

  Research output: Contribution to journal › Article

  • Vibration Analysis
  • Free Vibration
  • Vibration analysis
  • Smoothing
  • Derivatives
  7 Citations (Scopus)

• An investigation of non-straight fissures cracking under uniaxial compression

  Ma, G. W., Dong, Q. Q., Fan, L. F. & Gao, J. W., 15 Mar 2018, In : Engineering Fracture Mechanics. 191, p. 300-310

  Research output: Contribution to journal › Article
  15 Citations (Scopus)

• A practical nonprobabilistic reliability assessment method on key strata shear failure in Longwall Mining

  Luan, H., Wang, J., Ma, G. & Zhang, K., 2015, In : Mathematical Problems in Engineering. 2015, p. 893019

  Research output: Contribution to journal › Article

  Open Access

  • Reliability Assessment
  • Longwall mining
  • Mining
  • China
  • Roofs
  2 Citations (Scopus)

• Arbitrary discontinuities in the numerical manifold method

  An, X. M., Ma, G., Cai, Y. C. & Zhu, H. H., 2011, In : International Journal of Computational Methods. 8, 2, p. 315-347

  Research output: Contribution to journal › Article
  17 Citations (Scopus)

• A review on effects of different factors on gas explosions in underground structures

  Xu, Y., Huang, Y. & Ma, G., Dec 2020, In : Underground Space (China). 5, 4, p. 298-314 17 p.

  Research output: Contribution to journal › Article

  Open Access

  • Underground structures
  • explosion
  • Explosions
  • Gases
  • gas
  4 Citations (Scopus)

• Assessment of underground tunnel stability to adjacent tunnel explosion

  Li, J., Li, H., Ma, G. & Zhou, Y. X., 2013, In : Tunnelling and Underground Space Technology. 35, p. 227-234

  Research output: Contribution to journal › Article

  • explosion
  • Explosions
  • tunnel
  • Tunnels
  • particle
  53 Citations (Scopus)

• Boundary Element based Discontinuous Deformation Analysis

  Fu, G. Y., Ma, G. W. & Qu, X. L., 1 May 2017, In : International Journal for Numerical and Analytical Methods in Geomechanics. 41, 7, p. 994-1015 22 p.

  Research output: Contribution to journal › Article

  • Insulator Elements
  • bis(p-chlorophenyl)acetic acid
  • Digital differential analyzers
  • toppling
  • analysis
  10 Citations (Scopus)

• Centrifuge model studies on the stability of fibre-reinforced cemented paste backfill stopes

  Yi, X. W., Ma, G. W. & Fourie, A., 1 Aug 2018, In : Geotextiles and Geomembranes. 46, 4, p. 396-401 6 p.

  Research output: Contribution to journal › Article

  • Centrifuges
  • backfill
  • centrifuge
  • Ointments
  • fiber
  13 Citations (Scopus)

• Centroid sliding pyramid method for removability and stability analysis of fractured hard rock

  Wu, W., Zhuang, X., Zhu, H., Liu, X. & Ma, G., 1 Jun 2017, In : Acta Geotechnica. 12, 3, p. 627-644 18 p.

  Research output: Contribution to journal › Article

  • hard rock
  • stability analysis
  • sliding
  • Rocks
  • Cones
  8 Citations (Scopus)

• Comparative Study of Hybrid Artificial Intelligence Approaches for Predicting Hangingwall Stability

  Qi, C., Fourie, A., Ma, G., Tang, X. & Du, X., 1 Mar 2018, In : Journal of Computing in Civil Engineering. 32, 2, 04017086.

  Research output: Contribution to journal › Article

  • Artificial intelligence
  • Machine learning
  • Logistics
  • Support vector machines
  • Multilayer neural networks
  31 Citations (Scopus)

• Comparisons between centrifuge and numerical modeling results for slope toppling failure

  Chen, Z. Y., Gong, W. J., Ma, G., Wang, J., He, L., Xing, Y. C. & Xing, J. Y., 2015, In : Science China Technological Sciences. 58, 9, p. 1497-1508

  Research output: Contribution to journal › Article

  • Centrifuges
  • Rocks
  • Finite difference method
  • Computer simulation
  • Failure modes
  19 Citations (Scopus)

• Compressive behaviour of fibre-reinforced cemented paste backfill

  Yi, X., Ma, G. & Fourie, A., 2015, In : Geotextiles and Geomembranes. 43, 3, p. 207-215

  Research output: Contribution to journal › Article

  • backfill
  • Ointments
  • fiber
  • Fibers
  • Tailings
  65 Citations (Scopus)

• Confidence-based quantitative risk analysis for offshore accidental hydrocarbon release events

  Huang, Y., Ma, G., Li, J. & Hao, H., 2015, In : Journal of Loss Prevention in the Process Industries. 35, p. 117-124

  Research output: Contribution to journal › Article

  • Risk Analysis
  • quantitative risk assessment
  • Hydrocarbons
  • Risk analysis
  • Fuzzy numbers
  6 Citations (Scopus)

• Coupled time domain integration algorithm for numerical manifold method

  Qu, X., Ma, G. & Fu, G., 1 May 2017, In : International Journal of Geomechanics. 17, 5, E4016005.

  Research output: Contribution to journal › Article

  • numerical method
  • stability analysis
  • Computational efficiency
  • rocks
  • Rocks
  3 Citations (Scopus)

• Crack extension process and failure behavior of marbles containing fillers

  Dong, Q. Q., Ma, G., Xia, M. J. & Zhen, H. B., 2015, In : Beijing Gongye Daxue Xuebao/Journal of Beijing University of Technology. 41, 9, p. 1375-1382

  Research output: Contribution to journal › Article

  • Marble
  • Fillers
  • Rocks
  • Cracks
  • Cements
  1 Citation (Scopus)

• Design of Metal Foam Cladding Subjected to Close-Range Blast

  Zhou, H., Ma, G., Li, J. & Zhao, Z., 2015, In : Journal of Performance of Constructed Facilities. 29, 4, p. 04014110-1 - 04014110-11

  Research output: Contribution to journal › Article

  • Metal foams
  • Foams
  • Explosions
  • Membranes
  • Plastics
  11 Citations (Scopus)

• Development of high-performance self-compacting concrete using waste recycled concrete aggregates and rubber granules

  Aslani, F., Ma, G., Law Yim Wan, D. & Muselin, G., 13 Feb 2018, In : Journal of Cleaner Production. 182, p. 553-566

  Research output: Contribution to journal › Article

  • Self compacting concrete
  • High performance concrete
  • Concrete aggregates
  • Rubber
  • rubber
  106 Citations (Scopus)

• Development of three-dimensional numerical manifold method for jointed rock slope stability analysis

  He, L., An, X., Ma, G. & Zhao, Z., 2013, In : International Journal of Rock Mechanics and Mining Sciences. 64, p. 22-35

  Research output: Contribution to journal › Article

  • Slope stability
  • slope stability
  • stability analysis
  • numerical method
  • Rocks
  46 Citations (Scopus)

• Different damage parameters on failure properties with non-straight marble under uniaxial compression

  Qianqian, D., Guowei, M., Qiusheng, W., Mingjie, X., Hebin, Z. & Qiaoyan, L., 2015, In : Electronic Journal of Geotechnical Engineering. 20, 14, p. 6151-6167

  Research output: Contribution to journal › Article

  • Marble
  • marble
  • fissure
  • Compaction
  • compression
  1 Citation (Scopus)

• Discontinuous deformation analysis in rock mechanics practice

  Hatzor, Y. H., Ma, G. & Shi, G. H., 20 Jul 2017, The Netherlands: CRC Press/Balkema. 410 p. (ISRM Book Series; vol. 5)

  Research output: Book/Report › Book

  • Rock mechanics
  • Rocks
  7 Citations (Scopus)

• Dual reciprocity boundary element based block model for discontinuous deformation analysis

  Fu, G., Ma, G. & Qu, X., 2015, In : Science China Technological Sciences. 58, 9, p. 1575-1586

  Research output: Contribution to journal › Article

  • Insulator Elements
  • Boundary element method
  • Convergence of numerical methods
  • Formability
  • Dynamic analysis
  2 Citations (Scopus)

• Dynamic material model of annealed soda-lime glass

  Zhang, X., Hao, H. & Ma, G., Mar 2015, In : International Journal of Impact Engineering. 77, p. 108-119 12 p.

  Research output: Contribution to journal › Article

  • Lime
  • Glass
  • Strain rate
  • Equations of state
  • Blasting
  38 Citations (Scopus)

• Effect of water to cement ratio, fly ash, and slag on the electromagnetic shielding effectiveness of mortar

  Wanasinghe, D., Aslani, F. & Ma, G., 30 Sep 2020, In : Construction and Building Materials. 256, 119409.

  Research output: Contribution to journal › Article

  • Coal Ash
  • Electromagnetic shielding
  • Fly ash
  • Mortar
  • Slags
  1 Citation (Scopus)

• Effects of capillary pressures on two-phase flow of immiscible carbon dioxide enhanced oil recovery in fractured media

  Wang, H. D., Chen, Y. & Ma, G. W., 1 Jan 2020, In : Energy. 190, 116445.

  Research output: Contribution to journal › Article

  • Carbon Dioxide
  • fractured medium
  • Capillarity
  • Enhanced recovery
  • Two-phase Flow

• Efficiency and Accuracy Verification of the Explicit Numerical Manifold Method for Dynamic Problems

  Qu, X., Wang, Y., Fu, G. & Ma, G., 2015, In : Rock Mechanics and Rock Engineering. 48, 3, p. 1131-1142

  Research output: Contribution to journal › Article

  • Wave propagation
  • numerical method
  • Computational efficiency
  • Rocks
  • wave propagation
  19 Citations (Scopus)

• Electromagnetic and microwave absorbing properties of cementitious composite for 3D printing containing waste copper solids

  Ma, G., Sun, J., Wang, L., Aslani, F. & Liu, M., 2018, In : Cement and Concrete Composites. 94, p. 215-225

  Research output: Contribution to journal › Article

  • Copper
  • Electromagnetic wave absorption
  • Printing
  • Microwaves
  • Electromagnetic waves
  13 Citations (Scopus)

• Electromagnetic shielding properties of carbon fibre reinforced cementitious composites

  Wanasinghe, D., Aslani, F. & Ma, G., 10 Nov 2020, In : Construction and Building Materials. 260, 120439.

  Research output: Contribution to journal › Article

  • Electromagnetic shielding
  • Carbon Fiber
  • Carbon fibers
  • Signal interference
  • Shielding

• Electromagnetic wave absorbing performance of 3D printed wave-shape copper solid cementitious element

  Sun, J., Huang, Y., Aslani, F. & Ma, G., Nov 2020, In : Cement and Concrete Composites. 114, 103789.

  Research output: Contribution to journal › Article

  • Electromagnetic waves
  • Copper
  • Electromagnetic wave reflection
  • Pollution
  • Printing
  1 Citation (Scopus)

• Energy absorption analysis of density graded aluminium foam

  Li, J. D., Ma, G., Zhou, H. Y. & Du, X. L., 2011, In : International Journal of Protective Structures. 2, 3, p. 333-349

  Research output: Contribution to journal › Article
  16 Citations (Scopus)

• Energy absorption of graded foam subjected to blast: A theoretical approach

  Zhou, H., Wang, Y., Wang, X., Zhao, Z. & Ma, G., 2015, In : Materials and Design. 84, p. 351-358

  Research output: Contribution to journal › Article

  • Energy absorption
  • Foams
  • Crushing
  • Plastics
  10 Citations (Scopus)