Find Research Outputs

Search results

• 2012

  Cover refinement of the numerical manifold method with application in crack propagation

  Yang, S., Ma, G. & Ren, X., 2012, 4th International Conference on Computational Methods. Gu, Y. T. & Saha, S. C. (eds.). Australia: International Conference on Computational Methods, p. N/A

  Research output: Chapter in Book/Conference paper › Conference paper
• 2015

  Experimental study on the traditional timber mortise-tenon joints

  Li, X., Zhao, J., Ma, G. & Huang, S., 2015, In : Advances in structural engineering. 18, 12, p. 2089-2102

  Research output: Contribution to journal › Article

  • Timber
  • Bending moments
  • Wood
  • Stiffness
  • Mechanical properties
  15 Citations (Scopus)
• 2012

  Analytical study of underground explosion induced surface motion

  Li, J. C., Ma, G. & Zhou, Y. X., 2012, In : Rock Mechanics and Rock Engineering. 45, 6, p. 1037-1046

  Research output: Contribution to journal › Article

  27 Citations (Scopus)
• 2015

  Experimental study on mechanical properties of sandstone specimens containing a single hole after high-temperature exposure

  Yin, Q., Jing, H. W. & Ma, G., 2015, In : Geotechnique Letters. 5, January-March, p. 43-48

  Research output: Contribution to journal › Article

  • Sandstone
  • mechanical property
  • experimental study
  • crack
  • sandstone
  11 Citations (Scopus)
• 2012

  Progressive failure analysis and support design of blocky rock mass based on extended key block method

  Fu, G. & Ma, G., 2012, 46th U.S. Rock Mechanics Geomechanics Symposium. United States: American Rock Mechanics Association, Vol. N/A. p. 8pp

  Research output: Chapter in Book/Conference paper › Conference paper

  1 Citation (Scopus)
• 2015

  Comparisons between centrifuge and numerical modeling results for slope toppling failure

  Chen, Z. Y., Gong, W. J., Ma, G., Wang, J., He, L., Xing, Y. C. & Xing, J. Y., 2015, In : Science China Technological Sciences. 58, 9, p. 1497-1508

  Research output: Contribution to journal › Article

  • Centrifuges
  • Rocks
  • Finite difference method
  • Computer simulation
  • Failure modes
  19 Citations (Scopus)
• 2012

  Topology analysis method for water flows in 2D discrete fracture networks

  Xu, Z. H., Ma, G. & Li, S. C., 2012, 46th U.S. Rock Mechanics Geomechanics Symposium. United Stated: American Rock Mechanics Association, Vol. N/A. p. 8pp

  Research output: Chapter in Book/Conference paper › Conference paper

  4 Citations (Scopus)
• 2015

  Crack extension process and failure behavior of marbles containing fillers

  Dong, Q. Q., Ma, G., Xia, M. J. & Zhen, H. B., 2015, In : Beijing Gongye Daxue Xuebao/Journal of Beijing University of Technology. 41, 9, p. 1375-1382

  Research output: Contribution to journal › Article

  • Marble
  • Fillers
  • Rocks
  • Cracks
  • Cements
  1 Citation (Scopus)
• 2018

  An investigation of non-straight fissures cracking under uniaxial compression

  Ma, G. W., Dong, Q. Q., Fan, L. F. & Gao, J. W., 15 Mar 2018, In : Engineering Fracture Mechanics. 191, p. 300-310

  Research output: Contribution to journal › Article
  15 Citations (Scopus)

• The blast alleviation effects of a hybrid barrier system with triple energy absorbers

  Liao, J. J. & Ma, G., 1 Sep 2018, In : Marine Structures. 61, p. 540-559 20 p.

  Research output: Contribution to journal › Article

  • Foams
  • Welds
  • Energy absorption
  • Analytical models
  • Compliance
• 2015

  Investigation of the permeability anisotropy of 2D fractured rock masses

  Ren, F., Ma, G., Fu, G. & Zhang, K., 2015, In : Engineering Geology. 196, p. 171-182

  Research output: Contribution to journal › Article

  • Anisotropy
  • anisotropy
  • Rocks
  • permeability
  • rock
  36 Citations (Scopus)
• 2019

  Productivity evaluation of unconventional reservoir development with three-dimensional fracture networks

  Chen, Y., Ma, G., Jin, Y., Wang, H. & Wang, Y., 15 May 2019, In : Fuel. 244, p. 304-313 10 p.

  Research output: Contribution to journal › Article

  • Productivity
  • Oils
  • Pipe
  • Hydraulics
  • Horizontal wells
  10 Citations (Scopus)
• 2018

  Energy absorption of the ring stiffened tubes and the application in blast wall design

  Liao, J. J. & Ma, G., 25 Jun 2018, In : Structural Engineering and Mechanics. 66, 6, p. 713-727 15 p.

  Research output: Contribution to journal › Article

  • Energy absorption
  • Crushing
  • Analytical models
  • Hinges
  • Flanges
  4 Citations (Scopus)
• 2015

  An enriched K-means clustering method for grouping fractures with meliorated initial centers

  Ma, G., Xu, Z. H., Zhang, W. & Li, S. C., 2015, In : Arabian Journal of Geosciences. 8, 4, p. 1881-1893

  Research output: Contribution to journal › Article

  • geological mapping
  • method
  • literature
  • index
  • analysis
  13 Citations (Scopus)

• Evaluation of gas explosion overpressures at configurations with irregularly arranged obstacles

  Li, J., Ma, G., Abdel-Jawad, M. & Hao, H., 2015, In : Journal of Performance of Constructed Facilities. 29, 5, p. B4014003-1 - B4014003-8

  Research output: Contribution to journal › Article

  • Explosions
  • Computational fluid dynamics
  • Geometry
  • Gases
  • Engineers
  4 Citations (Scopus)
• 2020

  A review on effects of different factors on gas explosions in underground structures

  Xu, Y., Huang, Y. & Ma, G., Dec 2020, In : Underground Space (China). 5, 4, p. 298-314 17 p.

  Research output: Contribution to journal › Article

  Open Access

  • Underground structures
  • explosion
  • Explosions
  • Gases
  • gas
  4 Citations (Scopus)
• 2015

  Confidence-based quantitative risk analysis for offshore accidental hydrocarbon release events

  Huang, Y., Ma, G., Li, J. & Hao, H., 2015, In : Journal of Loss Prevention in the Process Industries. 35, p. 117-124

  Research output: Contribution to journal › Article

  • Risk Analysis
  • quantitative risk assessment
  • Hydrocarbons
  • Risk analysis
  • Fuzzy numbers
  6 Citations (Scopus)
• 2020

  Equivalent discrete fracture network method for numerical estimation of deformability in complexly fractured rock masses

  Ma, G., Li, M., Wang, H. & Chen, Y., Nov 2020, In : Engineering Geology. 277, 105784.

  Research output: Contribution to journal › Article

  • fracture network
  • Formability
  • Rocks
  • rock
  • elastic modulus
• 2019

  Simulation of buoyancy effect on the efficiency of geothermal development in supercritical CO₂-based EGS

  Chen, Y., Ma, G. W., Wang, H. D., Li, T. & Wang, Y., 26 Jun 2019.

  Research output: Contribution to conference › Conference presentation/ephemera

  • enhanced geothermal system
  • Buoyancy
  • buoyancy
  • carbon dioxide
  • Carbon Dioxide

• A mesh mapping method for simulating stress-dependent permeability of three-dimensional discrete fracture networks in rocks

  Ma, G., Wang, Y., Li, T. & Chen, Y., 1 Apr 2019, In : Computers and Geotechnics. 108, p. 95-106 12 p.

  Research output: Contribution to journal › Article

  • mapping method
  • fracture network
  • Rocks
  • Hydraulics
  • permeability
  7 Citations (Scopus)
• 2012

  Modeling rock failure using the numerical manifold method followed by the discontinuous deformation analysis

  Ning, Y-J., An, X-M., Lü, Q. & Ma, G., 2012, In : Acta Mechanica Sinica. 28, 3, p. 760

  Research output: Contribution to journal › Article
  9 Citations (Scopus)
• 2018

  Failure characteristics of intermittent fissures under a compressive-shear test: Experimental and numerical analyses

  Cao, R. H., Cao, P., Lin, H., Ma, G. & Chen, Y., 1 Aug 2018, In : Theoretical and Applied Fracture Mechanics. 96, p. 740-757 18 p.

  Research output: Contribution to journal › Article

  • Coalescence
  • Crack
  • coalescing
  • shear
  • Cracks
  38 Citations (Scopus)
• 2020

  A beetle antennae search improved BP neural network model for predicting multi-factor-based gas explosion pressures

  Xu, Y., Huang, Y. & Ma, G., May 2020, In : Journal of Loss Prevention in the Process Industries. 65, 104117.

  Research output: Contribution to journal › Article

  • Coleoptera
  • Back-propagation Neural Network
  • Neural Networks (Computer)
  • Explosions
  • explosions
  2 Citations (Scopus)
• 2018

  Printable properties of cementitious material containing copper tailings for extrusion based 3D printing

  Ma, G., Li, Z. & Wang, L., 20 Feb 2018, In : Construction and Building Materials. 162, p. 613-627 15 p.

  Research output: Contribution to journal › Article

  • Tailings
  • Copper
  • Extrusion
  • Printing
  • Sand
  92 Citations (Scopus)
• 2015

  Different damage parameters on failure properties with non-straight marble under uniaxial compression

  Qianqian, D., Guowei, M., Qiusheng, W., Mingjie, X., Hebin, Z. & Qiaoyan, L., 2015, In : Electronic Journal of Geotechnical Engineering. 20, 14, p. 6151-6167

  Research output: Contribution to journal › Article

  • Marble
  • marble
  • fissure
  • Compaction
  • compression
  1 Citation (Scopus)
• 2012

  Suggested methods for determining the dynamic strength parameters and mode-I fracture toughness of rock materials

  Zhou, Y. X., Xia, K., Li, X. B., Li, H. B., Ma, G., Zhao, J., Zhou, Z. L. & Dai, F., 2012, In : International Journal of Rock Mechanics and Mining Sciences. 49, p. 105-112

  Research output: Contribution to journal › Article
  404 Citations (Scopus)
• 2019

  A three-dimensional thermo-hydro-mechanical coupled model for enhanced geothermal systems (EGS) embedded with discrete fracture networks

  Wang, Y., Li, T., Chen, Y. & Ma, G., 1 Nov 2019, In : Computer Methods in Applied Mechanics and Engineering. 356, p. 465-489 25 p.

  Research output: Contribution to journal › Article

  • Embedded systems
  • fluid pressure
  • Geothermal energy
  • Fluids
  • sensitivity analysis
  4 Citations (Scopus)
• 2018

  The simulation of thermo-hydro-chemical coupled heat extraction process in fractured geothermal reservoir

  Chen, Y., Ma, G. & Wang, H., 1 Oct 2018, In : Applied Thermal Engineering. 143, p. 859-870 12 p.

  Research output: Contribution to journal › Article

  • Hot Temperature
  • Silica
  • Pipe
  • Reaction kinetics
  • Dissolution
  16 Citations (Scopus)

• Centrifuge model studies on the stability of fibre-reinforced cemented paste backfill stopes

  Yi, X. W., Ma, G. W. & Fourie, A., 1 Aug 2018, In : Geotextiles and Geomembranes. 46, 4, p. 396-401 6 p.

  Research output: Contribution to journal › Article

  • Centrifuges
  • backfill
  • centrifuge
  • Ointments
  • fiber
  13 Citations (Scopus)
• 2020

  Real-time quantification of fresh and hardened mechanical property for 3D printing material by intellectualization with piezoelectric transducers

  Ma, G., Li, Y., Wang, L., Zhang, J. & Li, Z., 30 Apr 2020, In : Construction and Building Materials. 241, 117982.

  Research output: Contribution to journal › Article

  • Piezoelectric transducers
  • Printing
  • Concretes
  • Mechanical properties
  • Stiffness
  10 Citations (Scopus)
• 2018

  Heat extraction mechanism in a geothermal reservoir with rough-walled fracture networks

  Chen, Y., Ma, G. & Wang, H., 1 Nov 2018, In : International Journal of Heat and Mass Transfer. 126, p. 1083-1093 11 p.

  Research output: Contribution to journal › Article

  • heat transfer coefficients
  • heat
  • Heat transfer coefficients
  • Hot Temperature
  • heat transfer
  34 Citations (Scopus)
• 2020

  XGBoost algorithm-based prediction of concrete electrical resistivity for structural health monitoring

  Dong, W., Huang, Y., Lehane, B. & Ma, G., 1 Jun 2020, In : Automation in Construction. 114, 103155.

  Research output: Contribution to journal › Article

  • Structural health monitoring
  • Concretes
  • Curing
  • Cements
  • Testing
  8 Citations (Scopus)
• 2018

  Electromagnetic and microwave absorbing properties of cementitious composite for 3D printing containing waste copper solids

  Ma, G., Sun, J., Wang, L., Aslani, F. & Liu, M., 2018, In : Cement and Concrete Composites. 94, p. 215-225

  Research output: Contribution to journal › Article

  • Copper
  • Electromagnetic wave absorption
  • Printing
  • Microwaves
  • Electromagnetic waves
  13 Citations (Scopus)
• 2020

  Advancements in electromagnetic interference shielding cementitious composites

  Wanasinghe, D., Aslani, F., Ma, G. & Habibi, D., 20 Jan 2020, In : Construction and Building Materials. 231, 117116.

  Research output: Contribution to journal › Review article

  • Signal interference
  • Shielding
  • Composite materials
  • Electromagnetic waves
  • Detonation
  7 Citations (Scopus)
• 2019

  Fiber-reinforced lightweight self-compacting concrete incorporating scoria aggregates at elevated temperatures

  Aslani, F., Sun, J., Bromley, D. & Ma, G., Jun 2019, In : Structural Concrete. 20, 3, p. 1022-1035

  Research output: Contribution to journal › Article

  Open Access

  • Self compacting concrete
  • Reinforced concrete
  • Fibers
  • Polypropylenes
  • Spalling
  10 Citations (Scopus)
• 2020

  Electromagnetic shielding properties of carbon fibre reinforced cementitious composites

  Wanasinghe, D., Aslani, F. & Ma, G., 10 Nov 2020, In : Construction and Building Materials. 260, 120439.

  Research output: Contribution to journal › Article

  • Electromagnetic shielding
  • Carbon Fiber
  • Carbon fibers
  • Signal interference
  • Shielding
• 2018

  13th International conference on steel, space and composite structures: volume of abstracts

  Aslani, F. (ed.), Ma, G. (ed.) & Uy, B. (ed.), 2018.

  Research output: Contribution to conference › Other

• Rectangular Concrete Columns Reinforced with Glass Fibre-Reinforced Polymer (GFRP) Rebars Subjected to Concentric and Eccentric Axial Loading

  Elchalakani, M., Aslani, F. & Ma, G., 2018, Conference proceedings. p. 1-10

  Research output: Chapter in Book/Conference paper › Conference paper
• 2020

  Effect of water to cement ratio, fly ash, and slag on the electromagnetic shielding effectiveness of mortar

  Wanasinghe, D., Aslani, F. & Ma, G., 30 Sep 2020, In : Construction and Building Materials. 256, 119409.

  Research output: Contribution to journal › Article

  • Coal Ash
  • Electromagnetic shielding
  • Fly ash
  • Mortar
  • Slags
  1 Citation (Scopus)
• 2012

  Development of P-I curve for laminate glass windows

  Zhang, X., Hao, H. & Ma, G., 2012, Proceedings the Australasian Structural Engineering Conference 2012. Australia: Engineers Australia, p. 1-8

  Research output: Chapter in Book/Conference paper › Conference paper
• 2015

  Dynamic material model of annealed soda-lime glass

  Zhang, X., Hao, H. & Ma, G., Mar 2015, In : International Journal of Impact Engineering. 77, p. 108-119 12 p.

  Research output: Contribution to journal › Article

  • Lime
  • Glass
  • Strain rate
  • Equations of state
  • Blasting
  38 Citations (Scopus)

• Efficiency and Accuracy Verification of the Explicit Numerical Manifold Method for Dynamic Problems

  Qu, X., Wang, Y., Fu, G. & Ma, G., 2015, In : Rock Mechanics and Rock Engineering. 48, 3, p. 1131-1142

  Research output: Contribution to journal › Article

  • Wave propagation
  • numerical method
  • Computational efficiency
  • Rocks
  • wave propagation
  19 Citations (Scopus)

• Dual reciprocity boundary element based block model for discontinuous deformation analysis

  Fu, G., Ma, G. & Qu, X., 2015, In : Science China Technological Sciences. 58, 9, p. 1575-1586

  Research output: Contribution to journal › Article

  • Insulator Elements
  • Boundary element method
  • Convergence of numerical methods
  • Formability
  • Dynamic analysis
  2 Citations (Scopus)
• 2012

  Research at the University of Western Australia on structure protections against blast impact loads

  Ma, G. & Hao, H., 2012, In : Australian Journal of Structural Engineering. 13, 1, p. 19-41

  Research output: Contribution to journal › Review article

  2 Citations (Scopus)
• 2015

  Energy absorption of graded foam subjected to blast: A theoretical approach

  Zhou, H., Wang, Y., Wang, X., Zhao, Z. & Ma, G., 2015, In : Materials and Design. 84, p. 351-358

  Research output: Contribution to journal › Article

  • Energy absorption
  • Foams
  • Crushing
  • Plastics
  10 Citations (Scopus)
• 2018

  Modelling temperature-influenced acidizing process in fractured carbonate rocks

  Ma, G., Chen, Y., Jin, Y. & Wang, H., 1 May 2018, In : International Journal of Rock Mechanics and Mining Sciences. 105, p. 73-84 12 p.

  Research output: Contribution to journal › Article

  • Carbonates
  • fracture network
  • carbonate rock
  • Rocks
  • dissolution
  25 Citations (Scopus)

• Segmented two-phase flow analysis in fractured geological medium based on the numerical manifold method

  Ma, G. W., Wang, H. D., Fan, L. F. & Chen, Y., 1 Nov 2018, In : Advances in Water Resources. 121, p. 112-129 18 p.

  Research output: Contribution to journal › Article

  • two phase flow
  • numerical method
  • fracture network
  • fluid
  • capillary pressure
  10 Citations (Scopus)

• Experimental study on Stress-Dependent nonlinear flow behavior and normalized transmissivity of real rock fracture networks

  Yin, Q., Jing, H., Liu, R., Ma, G., Yu, L. & Su, H., 24 Apr 2018, In : Geofluids. 2018, 8217921.

  Research output: Contribution to journal › Article

  Open Access

  • transmissivity
  • fracture network
  • experimental study
  • hydraulics
  • fluid flow
  7 Citations (Scopus)

• Comparative Study of Hybrid Artificial Intelligence Approaches for Predicting Hangingwall Stability

  Qi, C., Fourie, A., Ma, G., Tang, X. & Du, X., 1 Mar 2018, In : Journal of Computing in Civil Engineering. 32, 2, 04017086.

  Research output: Contribution to journal › Article

  • Artificial intelligence
  • Machine learning
  • Logistics
  • Support vector machines
  • Multilayer neural networks
  31 Citations (Scopus)
• 2012

  A time-domain recursive method to analyse transient wave propagation across rock joints

  Li, J. C., Li, H. B., Ma, G. & Zhao, J., 2012, In : Geophysical Journal International. 188, p. 631-644

  Research output: Contribution to journal › Article

  Open Access
  68 Citations (Scopus)