Find Research outputs — the UWA Profiles and Research Repository

Li, J. D., Zhou, H. Y. & Ma, G., 2011, proceedings of 3rd International Workshop on Performance, Protection and Strengthening of Structures Under Extreme Loading. Germany: Trans Tech Publications, Vol. 82. p. 461-466 (Applied Mechanics and Materials).

Research output: Chapter in Book/Conference paper › Conference paper

1 Citation (Scopus)

Modelling rock fracturing and blast-induced rock mass failure via advanced discretisation within the discontinuous deformation analysis framework

Ning, Y., Yang, J., An, X. & Ma, G., 2011, In : Computers and Geotechnics. 38, 1, p. 40-49

Research output: Contribution to journal › Article

146 Citations (Scopus)

2012

Topology analysis method for water flows in 2D discrete fracture networks

Xu, Z. H., Ma, G. & Li, S. C., 2012, 46th U.S. Rock Mechanics Geomechanics Symposium. United Stated: American Rock Mechanics Association, Vol. N/A. p. 8pp

Research output: Chapter in Book/Conference paper › Conference paper

4 Citations (Scopus)

Double-layer floor to mitigate in-structure shock of underground structures: A conceptual design

Zhou, H. Y. & Ma, G., 2012, In : Engineering Structures. 35, p. 314-321

Research output: Contribution to journal › Article

4 Citations (Scopus)

2011

In-structure shock assessment of underground structures with consideration of rigid body motion

Ma, G., Zhou, H. Y. & Chong, K., 2011, In : JOURNAL OF ENGINEERING MECHANICS-ASCE. 137, 12, p. 797-806

Research output: Contribution to journal › Article

12 Citations (Scopus)

2012

Nonlinear viscoelastic medium equivalence for stress wave propagation in a jointed rock mass

Fan, L. F., Ma, G. & Li, J. C., 2012, In : International Journal of Rock Mechanics and Mining Sciences. 50, p. 11-18

Research output: Contribution to journal › Article

22 Citations (Scopus)

Modeling rock failure using the numerical manifold method followed by the discontinuous deformation analysis

Ning, Y-J., An, X-M., Lü, Q. & Ma, G., 2012, In : Acta Mechanica Sinica. 28, 3, p. 760

Research output: Contribution to journal › Article

9 Citations (Scopus)

Laboratory Test on Dynamic Material Properties of Annealed Float Glass

Zhang, X., Zou, Y., Hao, H., Li, X., Ma, G. & Liu, K., 2012, In : International Journal of Protective Structures. 3, 4, p. 407-430

Research output: Contribution to journal › Article

60 Citations (Scopus)

2011

Energy absorption analysis of density graded aluminium foam

Li, J. D., Ma, G., Zhou, H. Y. & Du, X. L., 2011, In : International Journal of Protective Structures. 2, 3, p. 333-349

Research output: Contribution to journal › Article

16 Citations (Scopus)

Numerical simulation of compressive failure of heterogeneous rock-like materials using SPH method

Ma, G., Wang, X. J. & Ren, F., 2011, In : International Journal of Rock Mechanics and Mining Sciences. 48, 3, p. 353-363

Research output: Contribution to journal › Article

84 Citations (Scopus)

Prediction of rank deficiency in partition of unity-based methods with plane triangular or quadrilateral meshes

An, X. M., Li, L. X., Ma, G. & Zhang, H. H., 2011, In : Computer Methods in Applied Mechanics and Engineering. 200, 5-8, p. 665-674

Research output: Contribution to journal › Article

66 Citations (Scopus)

2019

Simulation of buoyancy effect on the efficiency of geothermal development in supercritical CO₂-based EGS

Chen, Y., Ma, G. W., Wang, H. D., Li, T. & Wang, Y., 26 Jun 2019.

Research output: Contribution to conference › Conference presentation/ephemera

A mesh mapping method for simulating stress-dependent permeability of three-dimensional discrete fracture networks in rocks

Ma, G., Wang, Y., Li, T. & Chen, Y., 1 Apr 2019, In : Computers and Geotechnics. 108, p. 95-106 12 p.

Research output: Contribution to journal › Article

7 Citations (Scopus)

2012

Development of P-I curve for laminate glass windows

Zhang, X., Hao, H. & Ma, G., 2012, Proceedings the Australasian Structural Engineering Conference 2012. Australia: Engineers Australia, p. 1-8

Research output: Chapter in Book/Conference paper › Conference paper

Suggested methods for determining the dynamic strength parameters and mode-I fracture toughness of rock materials

Zhou, Y. X., Xia, K., Li, X. B., Li, H. B., Ma, G., Zhao, J., Zhou, Z. L. & Dai, F., 2012, In : International Journal of Rock Mechanics and Mining Sciences. 49, p. 105-112

Research output: Contribution to journal › Article

406 Citations (Scopus)

2011

Metal foam cladding subjected to a localised blast: A theoretical approach

Zhou, H. Y., Ma, G., Li, J. D. & Zhao, Z. Y., 2011, Proceedings of the 9th International Conference on Shock & Impact Loads on Structures. Singapore: CI-Premier, Vol. 1. p. 725-734

Research output: Chapter in Book/Conference paper › Conference paper

2019

The equivalent discrete fracture networks based on the correlation index in highly fractured rock masses

Ma, G., Li, T., Wang, Y. & Chen, Y., 3 Oct 2019, In : Engineering Geology. 260, 105228.

Research output: Contribution to journal › Article

8 Citations (Scopus)

Tensile and bonding behaviours of hybridized BFRP-steel bars as concrete reinforcement

Ma, G., Huang, Y., Aslani, F. & Kim, T., 20 Mar 2019, In : Construction and Building Materials. 201, p. 62-71 10 p.

Research output: Contribution to journal › Article

12 Citations (Scopus)

2020

Mechanical and electrical properties of concrete incorporating an iron-particle contained nano-graphite by-product

Dong, W., Huang, Y., Lehane, B., Aslani, F. & Ma, G., 2020, (Accepted/In press) In : Construction and Building Materials. 121377.

Research output: Contribution to journal › Article

2019

Prediction of permeability and unconfined compressive strength of pervious concrete using evolved support vector regression

Sun, J., Zhang, J., Gu, Y., Huang, Y., Sun, Y. & Ma, G., 20 May 2019, In : Construction and Building Materials. 207, p. 440-449 10 p.

Research output: Contribution to journal › Article

25 Citations (Scopus)

Determination of Young's modulus of jet grouted coalcretes using an intelligent model

Sun, Y., Zhang, J., Li, G., Ma, G., Huang, Y., Sun, J., Wang, Y. & Nener, B., 26 Mar 2019, In : Engineering Geology. 252, p. 43-53 11 p.

Research output: Contribution to journal › Article

40 Citations (Scopus)

2020

A metaheuristic-optimized multi-output model for predicting multiple properties of pervious concrete

Zhang, J., Huang, Y., Ma, G., Sun, J. & Nener, B., 20 Jul 2020, In : Construction and Building Materials. 249, 118803.

Research output: Contribution to journal › Article

11 Citations (Scopus)

Electromagnetic wave absorbing performance of 3D printed wave-shape copper solid cementitious element

Sun, J., Huang, Y., Aslani, F. & Ma, G., Nov 2020, In : Cement and Concrete Composites. 114, 103789.

Research output: Contribution to journal › Article

1 Citation (Scopus)

XGBoost algorithm-based prediction of concrete electrical resistivity for structural health monitoring

Dong, W., Huang, Y., Lehane, B. & Ma, G., 1 Jun 2020, In : Automation in Construction. 114, 103155.

Research output: Contribution to journal › Article

9 Citations (Scopus)

Review on electromagnetic wave absorbing capacity improvement of cementitious material

Ma, G., Sun, J., Aslani, F., Huang, Y. & Jiao, F., 30 Nov 2020, In : Construction and Building Materials. 262, 120907.

Research output: Contribution to journal › Article

2019

Fiber-reinforced lightweight self-compacting concrete incorporating scoria aggregates at elevated temperatures

Aslani, F., Sun, J., Bromley, D. & Ma, G., Jun 2019, In : Structural Concrete. 20, 3, p. 1022-1035

Research output: Contribution to journal › Article

Open Access

10 Citations (Scopus)

2020

Electromagnetic shielding properties of carbon fibre reinforced cementitious composites

Wanasinghe, D., Aslani, F. & Ma, G., 10 Nov 2020, In : Construction and Building Materials. 260, 120439.

Research output: Contribution to journal › Article

Intelligent mixture design of steel fibre reinforced concrete using a support vector regression and firefly algorithm based multi-objective optimization model

Huang, Y., Zhang, J., Tze Ann, F. & Ma, G., 10 Nov 2020, In : Construction and Building Materials. 260, 120457.

Research output: Contribution to journal › Article

3 Citations (Scopus)

2019

Flexural behaviour of reinforced concrete beams strengthened with pre-stressed and near surface mounted steel-basalt-fibre composite bars

Zhao, Y., Huang, Y., Du, H. & Ma, G., 2 Dec 2019, In : Advances in structural engineering. 14 p., 1369433219891595.

Research output: Contribution to journal › Article

2020

A coupled time integration algorithm for discontinuous deformation analysis using the numerical manifold method

Qu, X., Ma, G., Qi, C., Dyskin, A. V. & Xia, C., 10 Jun 2020, In : International Journal for Numerical and Analytical Methods in Geomechanics. 44, 8, p. 1145-1169 25 p.

Research output: Contribution to journal › Article

2019

Productivity evaluation of unconventional reservoir development with three-dimensional fracture networks

Chen, Y., Ma, G., Jin, Y., Wang, H. & Wang, Y., 15 May 2019, In : Fuel. 244, p. 304-313 10 p.

Research output: Contribution to journal › Article

10 Citations (Scopus)

2012

Progressive failure analysis and support design of blocky rock mass based on extended key block method

Fu, G. & Ma, G., 2012, 46th U.S. Rock Mechanics Geomechanics Symposium. United States: American Rock Mechanics Association, Vol. N/A. p. 8pp

Research output: Chapter in Book/Conference paper › Conference paper

1 Citation (Scopus)

2011

Analysis of Stochastic Seismic Wave Interaction with a Slippery Rock Fault

Li, J. C., Ma, G. & Zhao, J. A., 2011, In : Rock Mechanics and Rock Engineering. 44, 1, p. 85-92

Research output: Contribution to journal › Article

34 Citations (Scopus)

Footwall slope stability analysis with the numerical manifold method

Ning, Y. J., An, X. M. & Ma, G., 2011, In : International Journal of Rock Mechanics and Mining Sciences. 48, 6, p. 964-975

Research output: Contribution to journal › Article

151 Citations (Scopus)

2012

A time-domain recursive method to analyse transient wave propagation across rock joints

Li, J. C., Li, H. B., Ma, G. & Zhao, J., 2012, In : Geophysical Journal International. 188, p. 631-644

Research output: Contribution to journal › Article

Open Access

69 Citations (Scopus)

2019

A three-dimensional thermo-hydro-mechanical coupled model for enhanced geothermal systems (EGS) embedded with discrete fracture networks

Wang, Y., Li, T., Chen, Y. & Ma, G., 1 Nov 2019, In : Computer Methods in Applied Mechanics and Engineering. 356, p. 465-489 25 p.

Research output: Contribution to journal › Article

4 Citations (Scopus)

2020

Numerical evaluation of a fracture acidizing treatment in a three-dimensional fractured carbonate reservoir

Chen, Y., Wang, H., Wang, Y. & Ma, G., Sep 2020, In : Journal of Natural Gas Science and Engineering. 81, 103440.

Research output: Contribution to journal › Article

2011

Three-phase medium model for filled rock joint and interaction with stress waves

Ma, G., Li, J. C. & Zhao, J., 2011, In : International Journal for Numerical and Analytical Methods in Geomechanics. 35, 1, p. 97-110

Research output: Contribution to journal › Article

37 Citations (Scopus)

A new way to treat material discontinuities in the numerical manifold method

An, X. M., Ma, G., Cai, Y. C. & Zhu, H. H., 2011, In : Computer Methods in Applied Mechanics and Engineering. 200, p. 3296–3308

Research output: Contribution to journal › Article

50 Citations (Scopus)

2020

Failure mechanism of S-shaped fissure in brittle materials under uniaxial tension: Experimental and numerical analyses

Dong, Q. Q., Wei, H. J. & Ma, G. W., 15 May 2020, In : International Journal of Solids and Structures. 191-192, p. 486-496 11 p.

Research output: Contribution to journal › Article

1 Citation (Scopus)

2012

Effective viscoelastic behaviour of rock mass with double-scale discontinuities

Fan, L. F., Ma, G. & Wong, L. N. Y., 2012, In : Geophysical Journal International. 191, p. 147-154

Research output: Contribution to journal › Article

14 Citations (Scopus)

2019

Numerical analysis of heat mining and geological carbon sequestration in supercritical CO ₂ circulating enhanced geothermal systems inlayed with complex discrete fracture networks

Wang, Y., Li, T., Chen, Y. & Ma, G., 15 Apr 2019, In : Energy. p. 92-108 17 p.

Research output: Contribution to journal › Article

15 Citations (Scopus)

Modelling uniaxial compressive strength of lightweight self-compacting concrete using random forest regression

Zhang, J., Ma, G., Huang, Y., sun, J., Aslani, F. & Nener, B., 20 Jun 2019, In : Construction and Building Materials. 210, p. 713-719 7 p.

Research output: Contribution to journal › Article

32 Citations (Scopus)

2020

A hybrid intelligent system for designing optimal proportions of recycled aggregate concrete

Zhang, J., Huang, Y., Aslani, F., Ma, G. & Nener, B., 10 Nov 2020, In : Journal of Cleaner Production. 273, 122922.

Research output: Contribution to journal › Article

8 Citations (Scopus)

Effect of water to cement ratio, fly ash, and slag on the electromagnetic shielding effectiveness of mortar

Wanasinghe, D., Aslani, F. & Ma, G., 30 Sep 2020, In : Construction and Building Materials. 256, 119409.

Research output: Contribution to journal › Article

1 Citation (Scopus)

Filters for Research output

Search results