Find Research Outputs — the UWA Profiles and Research Repository

2012

Cover refinement of the numerical manifold method with application in crack propagation

Yang, S., Ma, G. & Ren, X., 2012, 4th International Conference on Computational Methods. Gu, Y. T. & Saha, S. C. (eds.). Australia: International Conference on Computational Methods, p. N/A

Research output: Chapter in Book/Conference paper › Conference paper

2015

Experimental study on the traditional timber mortise-tenon joints

Li, X., Zhao, J., Ma, G. & Huang, S., 2015, In : Advances in structural engineering. 18, 12, p. 2089-2102

Research output: Contribution to journal › Article

15 Citations (Scopus)

2013

In-structure shock of underground structures: A revisit with experimental investigation

Zhou, H., Beppu, M., Ma, G. & Zhao, Z., 2013, In : Engineering Structures. 56, p. 1620-1630

Research output: Contribution to journal › Article

3 Citations (Scopus)

2012

Analytical study of underground explosion induced surface motion

Li, J. C., Ma, G. & Zhou, Y. X., 2012, In : Rock Mechanics and Rock Engineering. 45, 6, p. 1037-1046

Research output: Contribution to journal › Article

27 Citations (Scopus)

2015

Experimental study on mechanical properties of sandstone specimens containing a single hole after high-temperature exposure

Yin, Q., Jing, H. W. & Ma, G., 2015, In : Geotechnique Letters. 5, January-March, p. 43-48

Research output: Contribution to journal › Article

11 Citations (Scopus)

2012

Progressive failure analysis and support design of blocky rock mass based on extended key block method

Fu, G. & Ma, G., 2012, 46th U.S. Rock Mechanics Geomechanics Symposium. United States: American Rock Mechanics Association, Vol. N/A. p. 8pp

Research output: Chapter in Book/Conference paper › Conference paper

1 Citation (Scopus)

2015

Comparisons between centrifuge and numerical modeling results for slope toppling failure

Chen, Z. Y., Gong, W. J., Ma, G., Wang, J., He, L., Xing, Y. C. & Xing, J. Y., 2015, In : Science China Technological Sciences. 58, 9, p. 1497-1508

Research output: Contribution to journal › Article

19 Citations (Scopus)

2012

Topology analysis method for water flows in 2D discrete fracture networks

Xu, Z. H., Ma, G. & Li, S. C., 2012, 46th U.S. Rock Mechanics Geomechanics Symposium. United Stated: American Rock Mechanics Association, Vol. N/A. p. 8pp

Research output: Chapter in Book/Conference paper › Conference paper

4 Citations (Scopus)

2013

Stochastic key block analysis of underground excavations

Ma, G. & Fu, G., 2013, Proceedings of the 11th International Conference on Analysis of Discontinuous Deformation, ICADD11. Great Britain: CRC Press/Balkema, Vol. 2013. p. 51-60

Research output: Chapter in Book/Conference paper › Conference paper

2015

Crack extension process and failure behavior of marbles containing fillers

Dong, Q. Q., Ma, G., Xia, M. J. & Zhen, H. B., 2015, In : Beijing Gongye Daxue Xuebao/Journal of Beijing University of Technology. 41, 9, p. 1375-1382

Research output: Contribution to journal › Article

1 Citation (Scopus)

2013

A new contact method using multi-sphere covers for 3D Discontinuous Deformation Analysis

Zhu, H. H., Wu, W., Zhuang, X. Y. & Ma, G., 2013, Proceedings of the 11th International Conference on Analysis of Discontinuous, ICADD11. Great Britain: CRC Press/Balkema, Vol. 2013. p. 263-268

Research output: Chapter in Book/Conference paper › Conference paper

2 Citations (Scopus)

2018

An investigation of non-straight fissures cracking under uniaxial compression

Ma, G. W., Dong, Q. Q., Fan, L. F. & Gao, J. W., 15 Mar 2018, In : Engineering Fracture Mechanics. 191, p. 300-310

Research output: Contribution to journal › Article

15 Citations (Scopus)

The blast alleviation effects of a hybrid barrier system with triple energy absorbers

Liao, J. J. & Ma, G., 1 Sep 2018, In : Marine Structures. 61, p. 540-559 20 p.

Research output: Contribution to journal › Article

2015

Investigation of the permeability anisotropy of 2D fractured rock masses

Ren, F., Ma, G., Fu, G. & Zhang, K., 2015, In : Engineering Geology. 196, p. 171-182

Research output: Contribution to journal › Article

36 Citations (Scopus)

2018

Energy absorption of the ring stiffened tubes and the application in blast wall design

Liao, J. J. & Ma, G., 25 Jun 2018, In : Structural Engineering and Mechanics. 66, 6, p. 713-727 15 p.

Research output: Contribution to journal › Article

4 Citations (Scopus)

2015

An enriched K-means clustering method for grouping fractures with meliorated initial centers

Ma, G., Xu, Z. H., Zhang, W. & Li, S. C., 2015, In : Arabian Journal of Geosciences. 8, 4, p. 1881-1893

Research output: Contribution to journal › Article

13 Citations (Scopus)

Evaluation of gas explosion overpressures at configurations with irregularly arranged obstacles

Li, J., Ma, G., Abdel-Jawad, M. & Hao, H., 2015, In : Journal of Performance of Constructed Facilities. 29, 5, p. B4014003-1 - B4014003-8

Research output: Contribution to journal › Article

4 Citations (Scopus)

Confidence-based quantitative risk analysis for offshore accidental hydrocarbon release events

Huang, Y., Ma, G., Li, J. & Hao, H., 2015, In : Journal of Loss Prevention in the Process Industries. 35, p. 117-124

Research output: Contribution to journal › Article

6 Citations (Scopus)

2013

A meso-scale analysis method for the simulation of nonlinear damage and failure behavior of reinforced concrete members

Du, X., Jin, L. & Ma, G., 2013, In : International Journal of Damage Mechanics. 22, 6, p. 878-904

Research output: Contribution to journal › Article

53 Citations (Scopus)

Experimental investigation and modeling of viscoelastic behavior of concrete

Fan, L., Wong, L. N. Y. & Ma, G., 2013, In : Construction and Building Materials. 48, p. 814-821

Research output: Contribution to journal › Article

24 Citations (Scopus)

2011

Numerical simulation of compressive failure of heterogeneous rock-like materials using SPH method

Ma, G., Wang, X. J. & Ren, F., 2011, In : International Journal of Rock Mechanics and Mining Sciences. 48, 3, p. 353-363

Research output: Contribution to journal › Article

83 Citations (Scopus)

Analysis of Stochastic Seismic Wave Interaction with a Slippery Rock Fault

Li, J. C., Ma, G. & Zhao, J. A., 2011, In : Rock Mechanics and Rock Engineering. 44, 1, p. 85-92

Research output: Contribution to journal › Article

34 Citations (Scopus)

In-structure shock assessment of underground structures with consideration of rigid body motion

Ma, G., Zhou, H. Y. & Chong, K., 2011, In : JOURNAL OF ENGINEERING MECHANICS-ASCE. 137, 12, p. 797-806

Research output: Contribution to journal › Article

11 Citations (Scopus)

A new way to treat material discontinuities in the numerical manifold method

An, X. M., Ma, G., Cai, Y. C. & Zhu, H. H., 2011, In : Computer Methods in Applied Mechanics and Engineering. 200, p. 3296–3308

Research output: Contribution to journal › Article

50 Citations (Scopus)

Three-phase medium model for filled rock joint and interaction with stress waves

Ma, G., Li, J. C. & Zhao, J., 2011, In : International Journal for Numerical and Analytical Methods in Geomechanics. 35, 1, p. 97-110

Research output: Contribution to journal › Article

37 Citations (Scopus)

2012

Modeling rock failure using the numerical manifold method followed by the discontinuous deformation analysis

Ning, Y-J., An, X-M., Lü, Q. & Ma, G., 2012, In : Acta Mechanica Sinica. 28, 3, p. 760

Research output: Contribution to journal › Article

9 Citations (Scopus)

2018

Failure characteristics of intermittent fissures under a compressive-shear test: Experimental and numerical analyses

Cao, R. H., Cao, P., Lin, H., Ma, G. & Chen, Y., 1 Aug 2018, In : Theoretical and Applied Fracture Mechanics. 96, p. 740-757 18 p.

Research output: Contribution to journal › Article

38 Citations (Scopus)

Printable properties of cementitious material containing copper tailings for extrusion based 3D printing

Ma, G., Li, Z. & Wang, L., 20 Feb 2018, In : Construction and Building Materials. 162, p. 613-627 15 p.

Research output: Contribution to journal › Article

92 Citations (Scopus)

2015

Different damage parameters on failure properties with non-straight marble under uniaxial compression

Qianqian, D., Guowei, M., Qiusheng, W., Mingjie, X., Hebin, Z. & Qiaoyan, L., 2015, In : Electronic Journal of Geotechnical Engineering. 20, 14, p. 6151-6167

Research output: Contribution to journal › Article

1 Citation (Scopus)

2012

Suggested methods for determining the dynamic strength parameters and mode-I fracture toughness of rock materials

Zhou, Y. X., Xia, K., Li, X. B., Li, H. B., Ma, G., Zhao, J., Zhou, Z. L. & Dai, F., 2012, In : International Journal of Rock Mechanics and Mining Sciences. 49, p. 105-112

Research output: Contribution to journal › Article

404 Citations (Scopus)

2018

The simulation of thermo-hydro-chemical coupled heat extraction process in fractured geothermal reservoir

Chen, Y., Ma, G. & Wang, H., 1 Oct 2018, In : Applied Thermal Engineering. 143, p. 859-870 12 p.

Research output: Contribution to journal › Article

16 Citations (Scopus)

Centrifuge model studies on the stability of fibre-reinforced cemented paste backfill stopes

Yi, X. W., Ma, G. W. & Fourie, A., 1 Aug 2018, In : Geotextiles and Geomembranes. 46, 4, p. 396-401 6 p.

Research output: Contribution to journal › Article

13 Citations (Scopus)

2013

Assessment of underground tunnel stability to adjacent tunnel explosion

Li, J., Li, H., Ma, G. & Zhou, Y. X., 2013, In : Tunnelling and Underground Space Technology. 35, p. 227-234

Research output: Contribution to journal › Article

54 Citations (Scopus)

2018

Heat extraction mechanism in a geothermal reservoir with rough-walled fracture networks

Chen, Y., Ma, G. & Wang, H., 1 Nov 2018, In : International Journal of Heat and Mass Transfer. 126, p. 1083-1093 11 p.

Research output: Contribution to journal › Article

34 Citations (Scopus)

Electromagnetic and microwave absorbing properties of cementitious composite for 3D printing containing waste copper solids

Ma, G., Sun, J., Wang, L., Aslani, F. & Liu, M., 2018, In : Cement and Concrete Composites. 94, p. 215-225

Research output: Contribution to journal › Article

13 Citations (Scopus)

13th International conference on steel, space and composite structures: volume of abstracts

Aslani, F. (ed.), Ma, G. (ed.) & Uy, B. (ed.), 2018.

Research output: Contribution to conference › Other

Rectangular Concrete Columns Reinforced with Glass Fibre-Reinforced Polymer (GFRP) Rebars Subjected to Concentric and Eccentric Axial Loading

Elchalakani, M., Aslani, F. & Ma, G., 2018, Conference proceedings. p. 1-10

Research output: Chapter in Book/Conference paper › Conference paper

2015

Dynamic material model of annealed soda-lime glass

Zhang, X., Hao, H. & Ma, G., Mar 2015, In : International Journal of Impact Engineering. 77, p. 108-119 12 p.

Research output: Contribution to journal › Article

38 Citations (Scopus)

Efficiency and Accuracy Verification of the Explicit Numerical Manifold Method for Dynamic Problems

Qu, X., Wang, Y., Fu, G. & Ma, G., 2015, In : Rock Mechanics and Rock Engineering. 48, 3, p. 1131-1142

Research output: Contribution to journal › Article

19 Citations (Scopus)

2012

Development of P-I curve for laminate glass windows

Zhang, X., Hao, H. & Ma, G., 2012, Proceedings the Australasian Structural Engineering Conference 2012. Australia: Engineers Australia, p. 1-8

Research output: Chapter in Book/Conference paper › Conference paper

2015

Energy absorption of graded foam subjected to blast: A theoretical approach

Zhou, H., Wang, Y., Wang, X., Zhao, Z. & Ma, G., 2015, In : Materials and Design. 84, p. 351-358

Research output: Contribution to journal › Article

10 Citations (Scopus)

2011

Numerical simulation of blast mitigation cladding with gradient metallic foam core

Li, J. D., Zhou, H. Y. & Ma, G., 2011, proceedings of 3rd International Workshop on Performance, Protection and Strengthening of Structures Under Extreme Loading. Germany: Trans Tech Publications, Vol. 82. p. 461-466 (Applied Mechanics and Materials).

Research output: Chapter in Book/Conference paper › Conference paper

1 Citation (Scopus)

Energy absorption analysis of density graded aluminium foam

Li, J. D., Ma, G., Zhou, H. Y. & Du, X. L., 2011, In : International Journal of Protective Structures. 2, 3, p. 333-349

Research output: Contribution to journal › Article

16 Citations (Scopus)

2015

Dual reciprocity boundary element based block model for discontinuous deformation analysis

Fu, G., Ma, G. & Qu, X., 2015, In : Science China Technological Sciences. 58, 9, p. 1575-1586

Research output: Contribution to journal › Article

2 Citations (Scopus)

2011

Simulation of viscoelastic behavior of defected rock by using numerical manifold method

Ren, F., Fan, L. F. & Ma, G., 2011, In : Frontiers of Architecture and Civil Engineering in China. 5, 2, p. 199-207

Research output: Contribution to journal › Article

7 Citations (Scopus)

2012

Research at the University of Western Australia on structure protections against blast impact loads

Ma, G. & Hao, H., 2012, In : Australian Journal of Structural Engineering. 13, 1, p. 19-41

Research output: Contribution to journal › Review article

2 Citations (Scopus)

2013

Investigation on the damage process and the deformation of concrete using meso element equivalent method

Jin, L., Du, X. & Ma, G., 2013, Key Engineering Materials. Switzerland: Trans Tech Publications, Vol. 535-536. p. 578-581

Research output: Chapter in Book/Conference paper › Conference paper

Evaluation of equivalent medium methods for stress wave propagation in jointed rock mass

Ma, G., Fan, L. & Li, J., 2013, In : International Journal for Numerical and Analytical Methods in Geomechanics. 37, 7, p. 701-715

Research output: Contribution to journal › Article

26 Citations (Scopus)

2018

Modelling temperature-influenced acidizing process in fractured carbonate rocks

Ma, G., Chen, Y., Jin, Y. & Wang, H., 1 May 2018, In : International Journal of Rock Mechanics and Mining Sciences. 105, p. 73-84 12 p.

Research output: Contribution to journal › Article

25 Citations (Scopus)

Segmented two-phase flow analysis in fractured geological medium based on the numerical manifold method

Ma, G. W., Wang, H. D., Fan, L. F. & Chen, Y., 1 Nov 2018, In : Advances in Water Resources. 121, p. 112-129 18 p.

Research output: Contribution to journal › Article

10 Citations (Scopus)

Filters for Research Output

Search results