Xiao Hu

Professor, BE Northeastern (Shenyang), PhD Syd.

  • The University of Western Australia (M050), 35 Stirling Highway,

    6009 Perth

    Australia

  • 4190 Citations
  • 36 h-Index
1992 …2019
If you made any changes in Pure these will be visible here soon.

Research Output 1992 2019

Filter
Conference paper
1992

Influence of crack-tip shielding on fatigue crack growth in ceramic materials

Hu, X., 1992, Not available. Bannister, M. J. (ed.). Melbourne: CSIRO Publishing, p. 870-875

Research output: Chapter in Book/Conference paperConference paper

1993

Characterisation of fictitious crack with compliance measurements

Hu, X. & Wittmann, F. H., 1993, Not available. Wittmann, F. H. (ed.). Zurich: CRC Press/Balkema, Vol. 1. p. 29-39

Research output: Chapter in Book/Conference paperConference paper

1994

Analytical and Computer Simulations of Fracture Behaviour of Short-Fibre-Brittle-matrix Composites

Hu, X., Mai, Y. W. & Cotterell, B., 1994, 8th International Conference on Fracture (ICF8). Oxford: Pergamon, Vol. 8. p. 575-582

Research output: Chapter in Book/Conference paperConference paper

Influence of Interlaminar Reinforcement on Mixed Mode Delamination Toughness of Carbon Fibre/Epoxy Composites

Hu, X. & Sohn, M. S., 1994, Asian-Pacific Conference on Aerospace Technology and Science, APCATS '94. Beijing: International Academic Publishers, Vol. 3. p. 264-269

Research output: Chapter in Book/Conference paperConference paper

1995
67 Citations (Scopus)

Influence of Residual Stresses on Fracture Behaviour of Zirconia/Alumina Ceramic Laminates

Wang, H., Hu, X. & Lincoln, F., 1995, Fourteenth Australasian Conference on the Mechanics of Structures and Materials. Beasley, A. J. F. & C.G. Melerski, E. S. (eds.). Hobart ed. Hobart: The University of Tasmania, Vol. 1. p. 6-11

Research output: Chapter in Book/Conference paperConference paper

Micro-mechanisms of fracture and crack growth resistance in particulate reinforced metal matrix composites

Leggoe, J. W., Bush, M. & Hu, X., 1995, AMC95, Conference Proceedings. Perth: Institution of Metals and Materials, Australia, Vol. 2. p. 103-114

Research output: Chapter in Book/Conference paperConference paper

18 Citations (Scopus)

Production of Aluminium/Alumina Metal Matrix Composites by Mechanical Alloying

Lee, D., Fisher, G. V., Hu, X. & Mccormick, P., 1995, Proceedings Australasian Materials Conference. Perth: Institution of Metals and Materials Australia, p. 95-102

Research output: Chapter in Book/Conference paperConference paper

Surface Contact of Ceramic Laminates

Hu, X. & Wang, H., 1995, Proceedings of the Australian Materials Conference. Perth: Institution of Metals and Materials Australia, Vol. 1. p. 146-157

Research output: Chapter in Book/Conference paperConference paper

1996

Indentation Fracture/Fatigue Resistance and Residual Stresses in Zirconia/Alumina Ceramic Laminates

Hu, X. & Wang, H., 1996, Progress in Advanced Materials and Mechanics. Qiu, S. (ed.). Beijing, China ed. Beijing, China: Peking University Press, Vol. 1. p. 694-699

Research output: Chapter in Book/Conference paperConference paper

Interface and Intermediate Layer of Coarse and Fine Grained Alumina Laminates

Wang, H. & Hu, X., 1996, Progress in Advanced Materials and Mechanics. Qiu, S. (ed.). Beijing, China ed. Beijing, China: Peking University Press, Vol. 1. p. 923-928

Research output: Chapter in Book/Conference paperConference paper

1997

Analysis of contact stresses in ceramic laminates

Hu, X. & Wang, H., 1997, Advances in Fracture Research. Karihaloo, B. L., Mai, Y. W. & Ripley, M. I. (eds.). 1st ed. Sydney, Australia: Pergamon, Vol. 2. p. 1045-1052

Research output: Chapter in Book/Conference paperConference paper

Compressive strengths of carbon fibre composites with short-fibre reinforcement

Sohn, M. S., Harler, S. & Hu, X., 1997, Advances in Fracture Research. Karihaloo, B. L., Mai, Y. W. & Ripley, M. I. (eds.). Sydney ed. Sydney, Australia: Pergamon, Vol. 2. p. 893-900

Research output: Chapter in Book/Conference paperConference paper

Fatigue crack growth in 316L stainless steel

Wheatley, G., Niefanger, R., Estrin, Y. & Hu, X., 1997, Key Engineering Materials. Tong, P., Zhang, T. Y. & Kim, J. K. (eds.). Hong Kong ed. Hong Kong: Trans Tech Publications, Vol. 145-149, Part 2. p. 631-636

Research output: Chapter in Book/Conference paperConference paper

FEA study into the end effects of compressive loading

Chantler, P. M., Boyd, N. & Hu, X., 1997, 36th Annual Scientific Meeting, Australian and New Zealand Division. Sydney, NSW ed. Sydney: Journal of Dental Research, Vol. 76. p. 945

Research output: Chapter in Book/Conference paperConference paper

Fracture and damage at interfaces of ceramic laminates

Hu, X. & Wang, H., 1997, Key Engineering Materials. Tong, P., Zhang, T. Y. & Kim, J. K. (eds.). Hong Kong ed. Hong Kong: Trans Tech Publications, Vol. 145-149, Part 2. p. 901-906

Research output: Chapter in Book/Conference paperConference paper

Unidirectional carbon fibre/epoxy laminates interleaved by film adhesives and chopped Kevlar fibres

Sohn, M. S. & Hu, X., 1997, Key Engineering Materials. Tong, P., Zhang, T. Y. & Kim, J. K. (eds.). Hong Kong ed. Hong Kong: Trans Tech Publications, Vol. 145-149, Part 2. p. 727-732

Research output: Chapter in Book/Conference paperConference paper

1998

Determination of Young's modulus of dental composite materials: a potential design model

Chantler, P. M., Boyd, N. & Hu, X., 1998, The 1st Asian-Australasian Conference on Composite Materials. Miyano, Y. (ed.). Osaka, Japan ed. Osaka, Japan: Kuroki Publishing Company, Vol. 1. p. 304.1-304.4

Research output: Chapter in Book/Conference paperConference paper

Elastic modulus of particulate reinforced composites

Hu, X. & Bush, M., 1998, Proceedings of the International Conference on Mechanical Testing of Materials & Structures. Lee, S., Tang, J. W. & Chor, D. S. M. (eds.). Hong Kong ed. Hong Kong: HK Uni. of Sci. & Tech, Vol. 1. p. 94-103

Research output: Chapter in Book/Conference paperConference paper

Interaction between Low Cycle Fatigue and High Cycle in 316L Stainless Steel

Wheatley, G., Estrin, Y., Hu, X. & Brechet, Y., 1998, Low Cycle Fatigue and Elasto-Plastic Behaviour of Materials. Rie, K-T. & Portella, P. D. (eds.). Garmisch-Partenkirchen, German ed. Netherlands: Elsevier, Vol. 2. p. 567-572

Research output: Chapter in Book/Conference paperConference paper

Size effects in toughness induced by crack close to free edge

Hu, X., 1998, Fracture Mechanics of Concrete Structures. Mihashi, H. & Rokugo, K. (eds.). Gifu, Japan ed. Gifu, Japan: AEDIFICATIO Publishers, Vol. 3. p. 2011-2020

Research output: Chapter in Book/Conference paperConference paper

1999

An Asymptotic Approach to Size effect on Fracture Toughness and Energy

Hu, X., 1999, Proceedings of International Workshop on Fracture Mechanics and Advanced Engineering Materials. L. & Mai Ye, Y. W. (eds.). Sydney ed. Sydney: Sydney University, Vol. 1. p. 76-83

Research output: Chapter in Book/Conference paperConference paper

Bonded-interface test for carbon-fibre/epoxy laminate specimens

Sohn, M. S., Kim, H. S. & Hu, X., 1999, Proceedings of International Workshop on Fracture Mechanics and Advanced Engineering Materials. L. & Mai Ye, Y. W. (eds.). Sydney ed. Sydney: Sydney University, Vol. 1. p. 92-98

Research output: Chapter in Book/Conference paperConference paper

3 Citations (Scopus)

Contact Damage Analysis of Porcelain/Pd-Alloy Bilayers

Zhao, H., Hu, X., Bush, M. & Lawn, B. R., 1999, Proceedings of International Workshop on Fracture Mechanics and Advanced Engineering Materials. L. & Mai Ye, Y. W. (eds.). Sydney ed. Sydney: Sydney University, Vol. 1. p. 427-434

Research output: Chapter in Book/Conference paperConference paper

Interaction between Low Cycle Fatigue and High Cycle Fatigue in Common Metallic Materials

Wheatley, G., Bowman, D., Estrin, Y., Hu, X. & Brechet, Y., 1999, Fatigue'99. X.R. & Wang Wu, Z. G. (eds.). Beijing, China ed. Beijing: Higher Education Press, Vol. 2. p. 1045-1050

Research output: Chapter in Book/Conference paperConference paper

1 Citation (Scopus)

Layered Porcelain/palladium-Alloy Dental Composites

Zhao, H., Hu, X. & Bush, M., 1999, Fracture Mechanics and Advanced Engineering Materials. Mai, L. & Ye, Y. W. (eds.). Sydney ed. Sydney: UNSW Press, Vol. 14. p. 18-19

Research output: Chapter in Book/Conference paperConference paper

Limitations to Fracture Toughness Increases in Short Fibre Reinforced Carbon-fibre Composites due to Intra-ply Cracking

Walker, L. & Hu, X., 1999, Proceedings of International Workshop on Fracture Mechanics and Advanced Engineering Materials. L. & Mai Ye, Y. W. (eds.). Sydney ed. Sydney: Sydney University, Vol. 1. p. 364-371

Research output: Chapter in Book/Conference paperConference paper

Surface contact induced delamination in carbon fiber/epoxy composites

Sohn, M. S., Hu, X. & Guo, X. T., 1999, Proceedings of 6th Annual International Conference on Composites Engineering. Hui, D. (ed.). Florida ed. USA: Sydney University, Vol. 2. p. 789-790

Research output: Chapter in Book/Conference paperConference paper

2000

A numerical study of contact damage in porcelain/Pd-alloy bilayers

Ford, C., Bush, M., Hu, X. & Zhao, H., 2000, ICCE/7. Hui, D. (ed.). Denver, Colorado, USA ed. USA: ICCE, Vol. 1. p. 243-244

Research output: Chapter in Book/Conference paperConference paper

Low cycle/High cycle fatigue interaction and overstraining behaviour in 316L stainless steel

Wong, Y. K., Hu, X. & Norton, M. P., 2000, Structural Integrity and Fracture 2000. Heness, G. (ed.). Sydney ed. Sydney, Australia: University of Technology, Sydney (UTS), Vol. 1. p. 88-98

Research output: Chapter in Book/Conference paperConference paper

Temperature effect on impact responses of carbon fibre/epoxy composite laminates

Sohn, M. S., Hu, X. & Kim, J. K., 2000, ACCM-2000. Henes, J. (ed.). Sydney, Australia ed. Australia: Australian Fracture Group Inc., Vol. 1. p. 165-170

Research output: Chapter in Book/Conference paperConference paper

2001

Boundary effect on concrete fracture induced by non-constant fracture energy distribution

Duan, K., Hu, X. & Wittmann, F. H., 2001, Fracture Mechanics of Concrete Structures. Borst, R. D., Mazars, J., Pijaudier-Cabot, G. & Mier, J. G. M. V. (eds.). Cachan, France ed. Lisse, The Netherlands: CRC Press/Balkema, Vol. 1. p. 49-55

Research output: Chapter in Book/Conference paperConference paper

Drop weight impact damage characterization for carbon fibre/epoxy composite laminates

Sohn, M. S., Hu, X., Kim, J. K. & Hong, S. H., 2001, Proceedings of Korean Spring Annual Meeting on Composites. Hong, C. H. (ed.). Chang-Won, Gyeong Sang Nam-Do, ed. Chang-Won, Gyeong Sang Nam-Do, Korea: Korean Composite Materials Society, Vol. N/A. p. N/A

Research output: Chapter in Book/Conference paperConference paper

Plastically dominant/elastically dominant fatigue interaction

Wong, Y. K., Hu, X. & Norton, M. P., 2001, The 10th International Conference on Fracture. Kishi, T., Ritchie, R. O., Ravi-Chandar, K. & Yokobori, A. T. (eds.). Honolulu, Hawaii ed. Oxford, England: Elsevier, Vol. N/A. p. N/A

Research output: Chapter in Book/Conference paperConference paper

2002

An alternative definition for two distinct regimes of fatigue

Wong, Y. K., Hu, X. & Norton, M. P., 2002, Structural Integrity and Fracture. Dyskin, A. V., Hu, X. Z. & Sahouryeh, E. (eds.). Perth, Australia ed. Lisse, The Netherlands: CRC Press/Balkema, Vol. 1. p. 207-212

Research output: Chapter in Book/Conference paperConference paper

41 Citations (Scopus)

A Strength Model for Jointed Rocks under Uniaxial Compression

Duan, K., Lin, Y. M. & Hu, X., 2002, New Development in Rock Mechanics and Rock Engineering. Lin, Y. M., Tang, C. A., Feng, X. T. & Wang, S. H. (eds.). Shenyang, China ed. Princeton, New Jersey: Rinton Press Inc, Vol. 1. p. 179-184

Research output: Chapter in Book/Conference paperConference paper

Asymptotic analysis of boundary effects on fracture properties of notched bending specimens of concrete

Duan, K. & Hu, X., 2002, Structural Integrity and Fracture. Dyskin, A. V., Hu, X. Z. & Sahouryeh, E. (eds.). Perth, Australia ed. Lisse, The Netherlands: CRC Press/Balkema, Vol. 1. p. 19-24

Research output: Chapter in Book/Conference paperConference paper

4 Citations (Scopus)

Measurement of Hardness and Young's Modulus of Ceramic Thermal Barrier Coatings from Instrumented Microindentation Technique

Duan, K., Steinbrech, R. W. & Hu, X., 2002, AUSTCERAM2002 Proceedings. Low, I. M. & Phillips, D. N. (eds.). Perth, Australia ed. Perth, Australia: The Australasian Ceramic Society, Vol. 1. p. 203-204

Research output: Chapter in Book/Conference paperConference paper

2 Citations (Scopus)

Size effect and crack bridging in coarse-microstructure composites

Hu, X. & Duan, K., 2002, Structural Integrity and Fracture. Dyskin, A. V., Hu, X. Z. & Sahouryeh, E. (eds.). Perth, Australia ed. Lisse, The Netherlands: CRC Press/Balkema, Vol. 1. p. 43-48

Research output: Chapter in Book/Conference paperConference paper

2004
2 Citations (Scopus)

Application of Essential Work of Fracture Methodology to Polymer Fracture

Duan, K., Hu, X. & Mai, Y-W., 2004, Proceedings of the Fourth Asian-Australasian Conference on Composite Materials (ACCM-4). Sydney, Australia ed. Cambridge, England: Woodhead Publishing Limited, Vol. 1. p. 433-438

Research output: Chapter in Book/Conference paperConference paper

Asymptotic analysis of boundary-effect on strength of concrete

Duan, K. & Hu, X., 2004, Proceedings of the Fifth International Conference on Fracture Mechanics of Concrete and Concrete Structures. Colorado, USA ed. USA: Ia-FracMCos, Vol. 1. p. 197-204

Research output: Chapter in Book/Conference paperConference paper

Boundary effect on specific fracture energy of concrete

Duan, K., Hu, X. & Wittmann, F. H., 2004, Proceedings of the Fifth International Conference on Fracture Mechanics of Concrete and Concrete Structures. Li, V. C., Leung, C. K. Y., William, K. J. & Billington, S. L. (eds.). Colorado, USA ed. USA: Ia-FraMCos, Vol. 1. p. 205-212

Research output: Chapter in Book/Conference paperConference paper

Evaluation of elastic modulus and stress gradient of PECVD silicon nitride thin films

Huang, H., Winchester, K., Antoszewski, J., Nguyen, T., Martyniuk, M., Walmsley, B., Liu, Y., Hu, X., Musca, C., Dell, J. & Faraone, L., 2004, Structural Integrity and Fracture Proceedings of the International Conference SIF 2004. Brisbane, Australia ed. Australia: Australian Fracture Group Inc., Vol. 1. p. 149-154

Research output: Chapter in Book/Conference paperConference paper

Scaling of speciman boundary effect on quasi-brittle fracture

Duan, K. & Hu, X., 2004, SIF 2004 Structural Integrity and Fracture Proceedings of an International Conference. Brisbane, Australia ed. Queensland: Australian Fracture Group Inc., Vol. 1. p. 95-100

Research output: Chapter in Book/Conference paperConference paper

2005
1 Citation (Scopus)

Mechanical Design and Finite Element Analysis of Tunable Fabry-Perot MEMS Structures for Adaptive Infrared Detectors

Huang, H., Liu, Y., Hu, X., Bush, M., Winchester, K. J., Musca, C., Dell, J. & Faraone, L., 2005, 2004 Conference on Optoelectronic and Microelectronic Materials and Devices. Rakic, A. D. & Yeow, Y. T. (eds.). Brisbane, Australia ed. United States: IEEE, Institute of Electrical and Electronics Engineers, Vol. 1. p. 205-208

Research output: Chapter in Book/Conference paperConference paper

2007

Design and optimisation of a MEMS-based tunable Fabry-Pérot infrared filter

Walmsley, B. A., Dell, J., Faraone, L., Hu, X., Liu, Y. & Bush, M., 2007, COMMAD '06 Proceedings of the 2006 Conference on Optoelectronic and Microelectronic Materials and Devices. Faraone, L., Betts, S., Dell, J., Musca, C., Nener, B., Parish, G. & Wehner, J. (eds.). Perth, Western Australia ed. United States of America: IEEE, Institute of Electrical and Electronics Engineers, Vol. CD Rom. p. 272-275

Research output: Chapter in Book/Conference paperConference paper

2009

Delamination initiation in foam core sandwich beams with visco-elastic adhesive interfacial layer

Chen, H., Wang, C. & Hu, X., 2009, 12th International Conference on Fracture 2009, ICF-12. Canada, Vol. 12. p. 8pp

Research output: Chapter in Book/Conference paperConference paper

2011
4 Citations (Scopus)

Processing of layered hydroxyapatite ceramic composites

Sultana, R., Yang, J. & Hu, X., 2011, Structural Integrity and Failure. Germany: Trans Tech Publications, Vol. 275. p. 143-146 (Advanced Materials Research).

Research output: Chapter in Book/Conference paperConference paper

2013
2 Citations (Scopus)

WEIBULL-STRENGTH SIZE EFFECT AND COMMON PROBLEMS WITH SIZE EFFECT MODELS

Hu, X., Liang, L. & Yang, S., 2013, Proceedings of the 8th International Conference on Fracture Mechanics of Concrete and Concrete Structures, FraMCoS 2013. Spain, Vol. 1. p. 11pp

Research output: Chapter in Book/Conference paperConference paper

2014
1 Citation (Scopus)

Influence of CeO2 additive on the phase transformations of zirconia from zircon ore by carbothermal reduction process

Wang, T., Xu, Y., Huang, Z., Fang, M., Liu, Y., Wu, X., Yin, L., Liu, B. & Hu, X., 2014, Key Engineering Materials. Switzerland: Scientific.net, Vol. 602-603. p. 238-241

Research output: Chapter in Book/Conference paperConference paper

zircon
cerium
heating
temperature
ore

On the microstructure of a biocomposite fabricated from bioceramics and 3D Ti-mesh by dip coating method

Yi, W., Sun, X., Niu, D. & Hu, X., 2014, Applied Mechanics and Materials. Switzerland: Trans Tech Publications, Vol. 556-562. p. 355-361

Research output: Chapter in Book/Conference paperConference paper

glass coatings
ceramic coatings
coating
mesh
microstructure