Xiao Hu &ndash; Research Output

2019

1 Citation (Scopus)

Granite strength and toughness from small notched three-point-bend specimens of geometry dissimilarity

Han, X., Chen, Y., Hu, X., Liu, W., Li, Q. & Chen, S., 14 May 2019, In : Engineering Fracture Mechanics. 106482.

Research output: Contribution to journal › Article

Granite

Toughness

Geometry

Fracture toughness

Tensile strength

3 Citations (Scopus)

Improving impact resistance and residual compressive strength of carbon fibre composites using un-bonded non-woven short aramid fibre veil

Yuan, B., Tan, B., Hu, Y., Shaw, J. & Hu, X., 1 Jun 2019, In : Composites Part A: Applied Science and Manufacturing. 121, p. 439-448 10 p.

Research output: Contribution to journal › Article

Aramid fibers

Impact resistance

Compressive strength

Carbon fibers

Composite materials

2 Citations (Scopus)

NaOH etching and resin pre-coating treatments for stronger adhesive bonding between CFRP and aluminium alloy

Hu, Y., Yuan, B., Cheng, F. & Hu, X., 1 Dec 2019, In : Composites Part B: Engineering. 178, 107478.

Research output: Contribution to journal › Article

Carbon fiber reinforced plastics

Etching

Aluminum alloys

Adhesives

Resins

Pretreatment using diluted epoxy adhesive resin solution for improving bond strength between steel and wood surfaces

Tan, B., Ji, Y., Hu, Y., Yuan, B., Hu, X. & Huang, Z., 9 Nov 2019, In : International Journal of Adhesion and Adhesives. 102502.

Research output: Contribution to journal › Article

Steel

Bond strength (materials)

Adhesives

Wood

Resins

1 Citation (Scopus)

Quasi-brittle fracture criterion of bamboo-based fiber composites in transverse direction based on boundary effect model

Liu, W., Yu, Y., Hu, X., Han, X. & Xie, P., 15 Jul 2019, In : Composite Structures. 220, p. 347-354 8 p.

Research output: Contribution to journal › Article

Bamboo

Brittle fracture

Fibers

Composite materials

Direction compound

4 Citations (Scopus)

Statistical analysis of concrete fracture using normal distribution pertinent to maximum aggregate size

Guan, J., Yuan, P., Hu, X., Qing, L. & Yao, X., 1 Jun 2019, In : Theoretical and Applied Fracture Mechanics. 101, p. 236-253 18 p.

Research output: Contribution to journal › Article

Normal distribution

normal density functions

statistical analysis

Statistical Analysis

Gaussian distribution

1 Citation (Scopus)

基于边界效应理论确定热轧碳素钢的韧度与强度

Guan, J. F., Xie, C. P., Hu, X. Z., Yao, X. H. & Bai, W. F., 1 Mar 2019, In : Gongcheng Lixue/Engineering Mechanics. 36, 3, p. 231-239 9 p.

Research output: Contribution to journal › Article

Carbon steel

Yield stress

Fracture toughness

Cracks

Toughness

2018

8 Citations (Scopus)

Influence of grain size on granite strength and toughness with reliability specified by normal distribution

Zhang, C., Hu, X., Wu, Z. & Li, Q., 1 Aug 2018, In : Theoretical and Applied Fracture Mechanics. 96, p. 534-544 11 p.

Research output: Contribution to journal › Article

Toughness

Granite

Grain Size

granite

Normal distribution

13 Citations (Scopus)

Prediction of ceramic fracture with normal distribution pertinent to grain size

Zhang, C., Hu, X., Sercombe, T., Li, Q., Wu, Z. & Lu, P., 15 Feb 2018, In : Acta Materialia. 145, p. 41-48 8 p.

Research output: Contribution to journal › Article

Normal distribution

Brittle fracture

Cracks

Tensile strength

Fracture toughness

17 Citations (Scopus)

Wedge-splitting tests for tensile strength and fracture toughness of concrete

Guan, J. F., Hu, X. Z., Xie, C. P., Li, Q. B. & Wu, Z. M., 1 Feb 2018, In : Theoretical and Applied Fracture Mechanics. 93, p. 263-275 13 p.

Research output: Contribution to journal › Article

Fracture Toughness

Tensile Strength

toughness

fracture strength

Wedge

1 Citation (Scopus)

考虑骨料体积含量影响的混凝土准脆性断裂预测模型及应用

Xu, P., Hu, X. Z., Zhang, M. X. & Ma, J. Y., 1 Oct 2018, In : Gongcheng Lixue/Engineering Mechanics. 35, 10, p. 75-84 10 p.

Research output: Contribution to journal › Article

Concrete aggregates

Brittle fracture

Fracture toughness

Tensile strength

Bending tests

2017

39 Citations (Scopus)

Comparison of boundary and size effect models based on new developments

Hu, X., Guan, J., Wang, Y., Keating, A. & Yang, S., 15 Apr 2017, In : Engineering Fracture Mechanics. 175, p. 146-167 22 p.

Research output: Contribution to journal › Article

Concretes

Crack initiation

Brittle fracture

Curve fitting

Toughness

10 Citations (Scopus)

Fracture of 0.1 and 2 m long mortar beams under three-point-bending

Guan, J., Hu, X., Yao, X., Wang, Q., Li, Q. & Wu, Z., 5 Nov 2017, In : Materials and Design. 133, p. 363-375 13 p.

Research output: Contribution to journal › Article

Mortar

Brittle fracture

Fracture toughness

Tensile strength

Geometry

14 Citations (Scopus)

Improvement of adhesive bonding of grit-blasted steel substrates by using diluted resin as a primer

Wang, B., Hu, X. & Lu, P., 1 Mar 2017, In : International Journal of Adhesion and Adhesives. 73, p. 92-99 8 p.

Research output: Contribution to journal › Article

Steel

Adhesives

Resins

Ultrasonic cleaning

Substrates

1 Citation (Scopus)

Interface design and processing of bioactive microporous calcium phosphate coatings on load-bearing zirconia substrate

Sultana, R., Yang, J., Sun, Z. & Hu, X., 1 Jun 2017, In : Journal of Ceramic Science and Technology. 8, 2, p. 265-276 12 p.

Research output: Contribution to journal › Article

Bearings (structural)

Phosphate coatings

Calcium phosphate

Zirconia

Coatings

6 Citations (Scopus)

Quasi-Z-directional toughening from un-bonded non-woven veil at interface in laminar composites

Yuan, B., Wee, E. P. J., Cheong, J. L. K., Speelman, A., Long, R. T. J., Jiang, B., Li, Y. & Hu, X., 1 Dec 2017, In : Composites Communications. 6, p. 20-24 5 p.

Research output: Contribution to journal › Article

Toughening

Carbon fibers

Composite materials

Carbon

Fibers

Shear strength of epoxy adhesive joint between steel substrates with indented patterns

Wang, B., Bai, Y., Hu, X. & Lu, P., 29 Jul 2017, In : Journal of Adhesion. 93, 9, p. 657-666 10 p.

Research output: Contribution to journal › Article

Adhesive joints

Steel

Kevlar (trademark)

shear strength

Shear strength

2016

5 Citations (Scopus)

Benefits of short Kevlar fiber reinforcement at the interface for repair of concrete-like materials

Wang, Y. & Hu, X., 2016, In : Journal of Materials in Civil Engineering. 28, 9, 04016087.

Research output: Contribution to journal › Article

Fiber reinforced materials

Repair

Concretes

Adhesive joints

Fracture energy

2 Citations (Scopus)

Characterizing depth-dependent refractive index of articular cartilage subjected to mechanical wear or enzymic degeneration

Wang, K., Wu, J., Day, R., Kirk, T. B. & Hu, X., 2016, In : Journal of Biomedical Optics. 21, 9, 095002.

Research output: Contribution to journal › Article

cartilage

degeneration

Cartilage

Refractive index

Wear of materials

6 Citations (Scopus)

Design optimization of a radial functionally graded dental implant

Ichim, P., Hu, X., Bazen, J. & Yi, W., Jan 2016, In : JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS. 104, 1, p. 58-66

Research output: Contribution to journal › Article

Dental prostheses

Coatings

Bone

Zirconia

Compressive stress

37 Citations (Scopus)

Determination of tensile strength and fracture toughness of concrete using notched 3-p-b specimens

Wang, Y., Hu, X., Liang, L. & Zhu, W., Jul 2016, In : Engineering Fracture Mechanics. 160, p. 67-77

Research output: Contribution to journal › Article

Fracture toughness

Tensile strength

Concretes

Cracks

Composite structures

4 Citations (Scopus)

Edge Delamination and Residual Properties of Drilled Carbon Fiber Composites with and without Short-Aramid-Fiber Interleaf

Sun, Z., Hu, X., Shi, S., Guo, X., Zhang, Y. & Chen, H., 1 Oct 2016, In : Applied Composite Materials. 23, 5, p. 973-985 13 p.

Research output: Contribution to journal › Article

Aramid fibers

Carbon fiber reinforced plastics

Delamination

Carbon fibers

Laminates

10 Citations (Scopus)

Effect of fracture toughness and tensile strength on fracture based on boundary effect theory

Guan, J., Hu, X., Wang, Y., Li, Q. & Wu, Z., 1 Oct 2016, In : Journal of Hydraulic Engineering. 47, 10, p. 1298-1306 9 p.

Research output: Contribution to journal › Article

fracture toughness

tensile strength

Fracture toughness

Tensile strength

Cracks

130 Downloads (Pure)

Effects of heterogeneity and load amplitude on fatigue rate prediction of a welded joint

Zhang, C., Hui, J., Lu, P., Hu, X. & Liang, J., 2016, In : Advances in Mechanical Engineering. 8, 8, p. 1-8 8 p.

Research output: Contribution to journal › Article

Open Access

File

Welds

Fatigue of materials

Fatigue crack propagation

Welding

23 Citations (Scopus)

Enhanced epoxy adhesion between steel plates by surface treatment and CNT/short-fibre reinforcement

Wang, B., Bai, Y., Hu, X. & Lu, P., 2016, In : Composites Science and Technology. 127, p. 149-157 9 p.

Research output: Contribution to journal › Article

Adhesive joints

Steel

Fiber reinforced materials

Carbon Nanotubes

Surface treatment

24 Citations (Scopus)

In-depth analysis of notched 3-p-b concrete fracture

Guan, J., Hu, X. & Li, Q., 1 Oct 2016, In : Engineering Fracture Mechanics. 165, p. 57-71 15 p.

Research output: Contribution to journal › Article

Concretes

Fracture toughness

Bending (deformation)

Tensile strength

daminozide

2 Citations (Scopus)

Novel porous calcium aluminate/phosphate nanocomposites: In situ synthesis, microstructure and permeability

Yang, J., Hu, X., Huang, J., Chen, K., Huang, Z., Liu, Y., Fang, M. & Sun, X., 14 Feb 2016, In : Nanoscale. 8, 6, p. 3599-3606

Research output: Contribution to journal › Article

Calcium phosphate

Nanocomposites

Microstructure

Environmental engineering

Biomedical engineering

35 Citations (Scopus)

On compressive properties of composite sandwich structures with grid reinforced honeycomb core

Sun, Z., Shi, S., Guo, X., Hu, X. & Chen, H., 2016, In : Composites Part B: Engineering. 94, p. 245-252 8 p.

Research output: Contribution to journal › Article

Sandwich structures

Composite materials

Buckling

Stiffness

Energy absorption

Preparation of Si3N4 Form Diatomite via a Carbothermal Reduction-Nitridation Process

Ma, B., Huang, Z., Mei, L., Fang, M., Liu, Y., Wu, X. & Hu, X., 2016, In : JOM. 68, 5, p. 1456-1464 9 p.

Research output: Contribution to journal › Article

Carbothermal reduction

Nitridation

Heating

Phase composition

Sugar (sucrose)

Properties, mechanisms and their analysis of carbon fiber sandwich structures with short-aramid-fiber interfacial toughening

Chen, H. R., Sun, Z., Shi, S. S. & Hu, X. Z., 2016, In : DALIAN LIGONG DAXUE XUEBAO/JOURNAL OF DALIAN UNIVERSITY OF TECHNOLOGY. 56, 1, p. 103-110 8 p.

Research output: Contribution to journal › Article

Sandwich Structures

Aramid fibers

Sandwich structures

Carbon Fiber

sandwich structures

2015

2 Citations (Scopus)

Fracture-based model of periodic-arrayed indentation for rock cutting

Xie, Y., Wang, X. H., Hu, X. & Zhu, X. Z., 2015, In : International Journal of Rock Mechanics and Mining Sciences. 76, p. 217-221

Research output: Contribution to journal › Article

Indentation

Rocks

Stress intensity factors

Cracks

Substrates

14 Citations (Scopus)

Novel, low-cost solid-liquid-solid process for the synthesis of α-Si3N4 nanowires at lower temperatures and their luminescence properties

Liu, H., Huang, Z., Huang, J., Fang, M., Liu, Y. G., Wu, X., Hu, X. & Zhang, S., 2015, In : Scientific Reports. 5, p. 17250

Research output: Contribution to journal › Article

Open Access

Nanowires

Luminescence

Costs and Cost Analysis

Temperature

Photoelectron Spectroscopy

27 Citations (Scopus)

Short-aramid-fiber toughening of epoxy adhesive joint between carbon fiber composites and metal substrates with different surface morphology

Sun, Z., Shi, S., Hu, X., Guo, X., Chen, J. & Chen, H. R., Aug 2015, In : Composites Part B: Engineering. 77, p. 38-45

Research output: Contribution to journal › Article

Aramid fibers

Adhesive joints

Toughening

Carbon fibers

Surface morphology

4 Citations (Scopus)

Structure design and manufacturing of layered bioceramic scaffolds for load-bearing bone reconstruction

Yang, J., Hu, X., Sultana, R., Day, R. & Ichim, P., Aug 2015, In : Biomedical Materials (Bristol). 10, 4, p. 1-10 045006.

Research output: Contribution to journal › Article

Bearings (structural)

Bioceramics

Scaffolds

Bone

Apatites

2014

11 Citations (Scopus)

Adhesive joints between carbon fiber and aluminum foam reinforced by surface-treated aramid fibers

Sun, Z., Shi, S., Hu, X., Chen, H. R. & Wong, Z., 12 Dec 2014, In : Polymer Composites. 36, 1, p. 192-197 6 p.

Research output: Contribution to journal › Article

Aramid fibers

Adhesive joints

Aluminum

Carbon fibers

Foams

49 Citations (Scopus)

Carbon-fiber and aluminum-honeycomb sandwich composites with and without Kevlar-fiber interfacial toughening

Shi, S. S., Sun, Z., Hu, X. & Chen, H. R., Dec 2014, In : Composites Part A: Applied Science and Manufacturing. 67, p. 102-110

Research output: Contribution to journal › Article

Toughening

Aluminum

Carbon fibers

Fibers

Composite materials

Characteristics of micro-gold-particle/glass-ceramic composite from post-sintering thermal treatment

Yi, W., Sun, X., Niu, D. & Hu, X., Mar 2014, In : Journal of Ceramic Science and Technology. 5, 1, p. 45-50

Research output: Contribution to journal › Article

Glass ceramics

Gold

Sintering

Heat treatment

Composite materials

5 Citations (Scopus)

Compression performances and interfacial properties of carbon fiber-foam metal sandwich beams with aramid fiber toughening

Sun, Z., Shi, S., Sun, S., Chen, H. R. & Hu, X., 2014, In : Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica. 31, 6, p. 1497-1502

Research output: Contribution to journal › Article

metal foams

Aramid fibers

Toughening

carbon fibers

Carbon fibers

26 Citations (Scopus)

Effects of aramid-fibre toughening on interfacial fracture toughness of epoxy adhesive joint between carbon-fibre face sheet and aluminium substrate

Sun, Z., Hu, X. & Chen, H., Jan 2014, In : International Journal of Adhesion and Adhesives. 48, p. 288-294 7 p.

Research output: Contribution to journal › Article

Aramid fibers

Adhesive joints

Toughening

Aluminum

Carbon fibers

34 Citations (Scopus)

Flexural strength and energy absorption of carbon-fiber-aluminum-honeycomb composite sandwich reinforced by aluminum grid

Shi, S., Sun, Z., Hu, X. & Chen, H. R., Nov 2014, In : Thin-Walled Structures. 84, p. 416-422 7 p.

Research output: Contribution to journal › Article

Energy absorption

Bending strength

Carbon fibers

Aluminum

Composite materials

1 Citation (Scopus)

Influence of CeO2 additive on the phase transformations of zirconia from zircon ore by carbothermal reduction process

Wang, T., Xu, Y., Huang, Z., Fang, M., Liu, Y., Wu, X., Yin, L., Liu, B. & Hu, X., 2014, Key Engineering Materials. Switzerland: Scientific.net, Vol. 602-603. p. 238-241

Research output: Chapter in Book/Conference paper › Conference paper

zircon

cerium

heating

temperature

ore

11 Citations (Scopus)

Novel layered hydroxyapatite/Tri-calcium phosphate-zirconia scaffold composite with high bending strength for load-bearing bone implant application

Yang, J., Sultana, R., Hu, X. & Ichim, P., 22 Jan 2014, In : International Journal of Applied Ceramic Technology. 11, 1, p. 22-30 9 p.

Research output: Contribution to journal › Article

Bearings (structural)

calcium phosphates

flexural strength

Calcium phosphate

Durapatite

On the microstructure of a biocomposite fabricated from bioceramics and 3D Ti-mesh by dip coating method

Yi, W., Sun, X., Niu, D. & Hu, X., 2014, Applied Mechanics and Materials. Switzerland: Trans Tech Publications, Vol. 556-562. p. 355-361

Research output: Chapter in Book/Conference paper › Conference paper

glass coatings

ceramic coatings

coating

mesh

microstructure

2 Citations (Scopus)

Processing and Properties of BioCeramic Coatings onto 3D Ti-Mesh by DipCasting Method

Yi, W., Hu, X., Sun, X., Ichim, P. & Suvorova, A., 3 Nov 2014, In : International Journal of Applied Ceramic Technology. 11, 6, p. 1030-1038 9 p.

Research output: Contribution to journal › Article

Bioceramics

mesh

coatings

Coatings

Bioactive glass

7 Citations (Scopus)

Processing and property of carbon-fiber aluminum-foam sandwich with aramid-fiber composite adhesive joints

Sun, Z., Jeyaraman, J., Shi, S., Sun, S., Hu, X. & Chen, H., Sep 2014, In : Journal of Adhesion Science and Technology. 28, 18, p. 1835-1845

Research output: Contribution to journal › Article

aramid fiber composites

Aramid fibers

Adhesive joints

carbon fibers

Aluminum

3 Citations (Scopus)

Residual stress and softening in welded high-strength low-alloy steel with a buffering layer

Zhang, C., Lü, P. & Hu, X., 2014, In : Journal of Materials Processing Technology. 214, 2, p. 229-237

Research output: Contribution to journal › Article

Softening

Residual Stress

High strength steel

Residual stresses

Steel

2013

30 Citations (Scopus)

Buckling resistance of grid-stiffened carbon-fiber thin-shell structures

Shi, S., Sun, Z., Ren, M., Chen, H. & Hu, X., 2013, In : Composites Part B: Engineering. 45, 1, p. 888-896

Research output: Contribution to journal › Article

Carbon fibers

Buckling

Genetic algorithms

Simulated annealing

Aerospace applications

28 Citations (Scopus)

Buckling response of advanced grid stiffened carbon-fiber composite cylindrical shells with reinforced cutouts

Shi, S., Sun, Z., Ren, M., Chen, H. & Hu, X., 2013, In : Composites Part B: Engineering. 44, 1, p. 26-33

Research output: Contribution to journal › Article

Carbon fibers

Buckling

Composite materials

Reinforcement

Skin

53 Citations (Scopus)

Energy-absorption enhancement in carbon-fiber aluminum-foam sandwich structures from short aramid-fiber interfacial reinforcement

Sun, Z., Hu, X., Sun, S. & Chen, H., 2013, In : Composites Science and Technology. 77, p. 14-21

Research output: Contribution to journal › Article

Aramid fibers

Sandwich structures

Energy absorption

Aluminum

Carbon fibers

7 Citations (Scopus)

Modelling of multiple crack-branching from Mode-I crack-tip in isotropic solids

Xie, Y. J., Li, J., Hu, X., Wang, X. H., Cai, M. & Wang, W., 2013, In : Engineering Fracture Mechanics. 109, p. 105-116

Research output: Contribution to journal › Article

Crack tips

Cracks

Energy release rate

Conservation