Research Output 1988 2020

Filter
Conference paper
2019

Detection of snapping shrimp using machine learning.

Du, X., Youssef, A., Wang, Y., Padfield, N. & Matthews, D., 1 Jan 2019, Proceedings of the Australian Acoustical Society Annual Conference, AAS 2018. Australian Acoustical Society, p. 451-452 2 p. (Australian Acoustical Society Annual Conference, AAS 2018).

Research output: Chapter in Book/Conference paperConference paper

machine learning
acoustics
coverings
marine environments
logistics

Extracting vibration signal from measured data polluted by thermal noise using a Kalman filtering technique

Wu, B., Song, K. & Pan, J., 1 Jan 2019, Australian Acoustical Society Annual Conference, AAS 2018. Adelaide; Australia: Australian Acoustical Society, p. 313-320 8 p. (Australian Acoustical Society Annual Conference, AAS 2018).

Research output: Chapter in Book/Conference paperConference paper

linear prediction
thermal noise
Kalman filters
vibration
low pass filters

Investigation of a novel method for the fabrication of larger area imaging fibre bundles with greater number of pixels and reduced dead space

Sanders, T. M., Putrino, G. & Keating, A., 14 May 2019, 2018 Conference on Optoelectronic and Microelectronic Materials and Devices, COMMAD 2018. IEEE, Institute of Electrical and Electronics Engineers, p. 27-30 4 p. 8715238. (Conference on Optoelectronic and Microelectronic Materials and Devices).

Research output: Chapter in Book/Conference paperConference paper

Endoscopy
bundles
Pixels
pixels
Imaging techniques
196 Downloads (Pure)

Localised air conditioning: comfort with sustainable energy demand

Trevelyan, J., 11 Apr 2019, Comfort at the Extremes 2019: Proceedings of the 1st International Conference on: Comfort at the Extremes: Energy, Economy and Climate. Roaf, S. & Finlayson, W. (eds.). Ecohouse Initiative Ltd, p. 338-345 8 p.

Research output: Chapter in Book/Conference paperConference paper

Open Access
File
Air conditioning
Air
Greenhouses
Insulation
Cooling

Method for optical modelling of non-uniform and non-parallel multi-thin film MEMS optical filters and mirrors

Silva, J., Thripathi, D., Kala, H., Silva, D., Putrino, G., Keating, A., Martyniuk, M. & Faraone, L., 14 May 2019, 2018 Conference on Optoelectronic and Microelectronic Materials and Devices, COMMAD 2018. IEEE, Institute of Electrical and Electronics Engineers, p. 35-38 4 p. 8715240. (2018 Conference on Optoelectronic and Microelectronic Materials and Devices, COMMAD 2018).

Research output: Chapter in Book/Conference paperConference paper

Optical filters
optical filters
mirrors
filters
Thin films

Modelling of damping characteristics in silicon-gold bilayer cantilevers

Chenniappan, V., Silva, K. K. M. B. D., Umana-Membreno, G. A., Martyniuk, M., Keating, A., Dell, J. M. & Faraone, L., 14 May 2019, 2018 Conference on Optoelectronic and Microelectronic Materials and Devices, COMMAD 2018. IEEE, Institute of Electrical and Electronics Engineers, p. 5-6 2 p. 8715248. (Conference on Optoelectronic and Microelectronic Materials and Devices).

Research output: Chapter in Book/Conference paperConference paper

Silicon
Gold
Damping
damping
gold

Modelling the vibration response of a laminated beam based on equivalent material properties

Du, X., Li, L., Guzzomi, A., Jin, M. & Pan, J., 1 Jan 2019, Australian Acoustical Society Annual Conference, AAS 2018. Australia: Australian Acoustical Society, p. 334-343 10 p. (Australian Acoustical Society Annual Conference, AAS 2018).

Research output: Chapter in Book/Conference paperConference paper

vibration
frequency response
stiffness
transverse oscillation
friction factor

Nonlinear active noise control for a system with a nonminimum-phase secondary path

Zhu, L., Pan, J., Yang, T. & Du, X., 2019, Australian Acoustical Society Annual Conference, AAS 2018. Australian Acoustical Society, p. 400-406 7 p. (Australian Acoustical Society Annual Conference, AAS 2018).

Research output: Chapter in Book/Conference paperConference paper

roads
feedforward control
loudspeakers
microphones
noise reduction
1 Citation (Scopus)

Numerical modelling of pseudoelastic behaviour of geometrically graded shape memory alloys

Samsam Shariat, B., Bakhtiari, S. & Liu, Y., 2019, IOP Conference Series: Materials Science and Engineering. 1 ed. London: IOP Publishing, Vol. 522. 012005. (IOP Conference Series: Materials Science and Engineering).

Research output: Chapter in Book/Conference paperConference paper

Open Access

Risk prioritisation for cultural and arts infrastructure

Pham, A., Foster, D., Soo, C. & Hodkiewicz, M., 2019, Asset Intelligence through Integration and Interoperability and Contemporary Vibration Engineering Technologies: Proceedings of the 12th World Congress on Engineering Asset Management and the 13th International Conference on Vibration Engineering and Technology of Machinery. Springer, p. 483-490 8 p. (Lecture Notes in Mechanical Engineering).

Research output: Chapter in Book/Conference paperConference paper

Asset management
Theaters
Museums
Costs

Silicon and Silicon dioxide thin films deposited by ICPCVD at low temperature and high rate for MEMS applications

Revuri, P. K., Tripathi, D. K., Martyniuk, M., Silva, K. K. M. B. D., Putrino, G., Keating, A. & Faraone, L., 14 May 2019, 2018 Conference on Optoelectronic and Microelectronic Materials and Devices, COMMAD 2018. IEEE, Institute of Electrical and Electronics Engineers, p. 24-26 3 p. 8715249. (2018 Conference on Optoelectronic and Microelectronic Materials and Devices, COMMAD 2018).

Research output: Chapter in Book/Conference paperConference paper

Silicon oxides
Silicon
Deposition rates
Silicon Dioxide
microelectromechanical systems

Sound source localisation and signal extraction with multiple microphone arrays

Bao, C., Jia, L., Coral, B., Mathews, D., Sun, H. & Pan, J., 1 Jan 2019, Australian Acoustical Society Annual Conference, AAS 2018. Australia: Australian Acoustical Society, p. 492-500 9 p. (Australian Acoustical Society Annual Conference, AAS 2018).

Research output: Chapter in Book/Conference paperConference paper

microphones
acoustics
beamforming
lobes
constrictions

Study of Porosity Gradient in Released Porous Silicon Microstructures

Afandi, Y., Parish, G. & Keating, A., 14 May 2019, 2018 Conference on Optoelectronic and Microelectronic Materials and Devices, COMMAD 2018. IEEE, Institute of Electrical and Electronics Engineers, p. 1-4 4 p. 8715242. (2018 Conference on Optoelectronic and Microelectronic Materials and Devices, COMMAD 2018).

Research output: Chapter in Book/Conference paperConference paper

Porous silicon
porous silicon
Current density
Porosity
current density

The effect of inorganic impurities on CO2 gasification of a spent tyre pyrolysis char

Preciado-Hernandez, J., Jones, I., Zhang, J., Zhu, M., Zhang, Z. & Zhang, D., 1 Jan 2019, Proceedings of the 12th Asia-Pacific Conference on Combustion, ASPACC 2019.

Research output: Chapter in Book/Conference paperConference paper

tires
gasification
Gasification
Tires
pyrolysis

Time-domain modelling of boundary reflection using an acoustic wave propagator and image source method

Wang, N. & Pan, J., 1 Jan 2019, Proceedings of the Australian Acoustical Society Annual Conference, AAS 2018. Australian Acoustical Society, p. 164-169 6 p. (Australian Acoustical Society Annual Conference, AAS 2018).

Research output: Chapter in Book/Conference paperConference paper

propagation
acoustics
numerical stability
smoothing
wave propagation
120 Downloads (Pure)

Using thermography to investigate thermal characteristics of porous silicon

Keating, A., McNiven, B., Sun, X. & Andrews, G. T., 14 May 2019, 2018 Conference on Optoelectronic and Microelectronic Materials and Devices, COMMAD 2018. Australia: IEEE, Institute of Electrical and Electronics Engineers, p. 16-18 3 p. 8715236. (Conference on Optoelectronic and Microelectronic Materials and Devices).

Research output: Chapter in Book/Conference paperConference paper

Open Access
File
Porous silicon
porous silicon
conduction
Thin films
Conductive films
1 Citation (Scopus)

Where do we start? guidance for technology implementation in maintenance management for manufacturing

Brundage, M. P., Sexton, T., Hodkiewicz, M., Morris, K. C., Arinez, J., Ameri, F., Ni, J. & Xiao, G., 1 Sep 2019, Additive Manufacturing; Manufacturing Equipment and Systems; Bio and Sustainable Manufacturing. USA: The American Society of Mechanical Engineers (ASME), (ASME 2019 14th International Manufacturing Science and Engineering Conference, MSEC 2019; vol. 1).

Research output: Chapter in Book/Conference paperConference paper

Automation
Communication
2018

A cost effective, energy saving boosted evaporation process for alumina refineries

Zhang, H., Chua, H. T., Boom, E. & Cochrane, D., 2018, Alumina2018: The 11th AQW International Conference: Efficiency for the future. Australia: AQW, p. 90-98 9 p.

Research output: Chapter in Book/Conference paperConference paper

Open Access
Energy conservation
Evaporation
Alumina
Vapors
Costs
42 Downloads (Pure)

Field scale case studies of blue shift damage monitoring method

He, J., Pasternak, E. & Dyskin, A., 2018, Advances in Mechanics: Failure, Deformation Fatigue, Waves and Monitoring - Proceedings of the 11th International Conference on Structural Integrity and Failure, Perth, WA, Australia, 3-6 December 2018. Dyskin, A. & Pasternak, E. (eds.). Australia: Australian Fracture Group Inc., p. 101-107

Research output: Chapter in Book/Conference paperConference paper

File
235 Downloads (Pure)

Influence of the shape of 3-D cracks on their growth in biaxial compression

Wang, H., Dyskin, A., Pasternak, E. & Dight, P., 2018, Advances in Mechanics: Failure, Deformation Fatigue, Waves and Monitoring - Proceedings of the 11th International Conference on Structural Integrity and Failure, Perth, WA, Australia, 3-6 December 2018. Dyskin, A. & Pasternak, E. (eds.). Australia: Australian Fracture Group Inc., p. 108-114

Research output: Chapter in Book/Conference paperConference paper

File
10 Downloads (Pure)

Modelling fault instability caused by asymmetric friction

Wong, R. X., Pasternak, E. & Dyskin, A., 2018, Advances in Mechanics: Failure, Deformation Fatigue, Waves and Monitoring - Proceedings of the 11th International Conference on Structural Integrity and Failure, Perth, WA, Australia, 3-6 December 2018. Dyskin, A. & Pasternak, E. (eds.). Australia: Australian Fracture Group Inc., p. 138-143

Research output: Chapter in Book/Conference paperConference paper

File
50 Downloads (Pure)

Stress distribution in osteomorphic blocks with holes

Khudyakov, M., Pasternak, E. & Dyskin, A., 2018, Advances in Mechanics: Failure, Deformation Fatigue, Waves and Monitoring - Proceedings of the 11th International Conference on Structural Integrity and Failure, Perth, WA, Australia, 3-6 December 2018. Dyskin, A. & Pasternak, E. (eds.). Australia: Australian Fracture Group Inc., p. 21-26

Research output: Chapter in Book/Conference paperConference paper

File

Transitional negative stiffness and its effect on material instability and failure under compression

Dyskin, A., Pasternak, E. & Xu, Y., 2018, Advances in Mechanics: Failure, Deformation Fatigue, Waves and Monitoring: Proceedings of the 11th International Conference on Structural Integrity and Failure, Perth, WA, Australia, 3-6 December 2018. Dyskin, A. & Pasternak, E. (eds.). Perth: Australian Fracture Group Inc., p. 121-125

Research output: Chapter in Book/Conference paperConference paper

63 Downloads (Pure)

Wave propagation in materials with closing micro-cracks modelled by discrete chain of bilinear oscillators with damping

Kuznetsova, M., Pasternak, E. & Dyskin, A., 2018, Advances in Mechanics: Failure, Deformation Fatigue, Waves and Monitoring - Proceedings of the 11th International Conference on Structural Integrity and Failure, Perth, WA, Australia, 3-6 December 2018. Dyskin, A. & Pasternak, E. (eds.). Perth, Australia: Australian Fracture Group Inc., p. 154-159

Research output: Chapter in Book/Conference paperConference paper

File
2017
1 Citation (Scopus)

Modified FEA and ExtraTree algorithm for transformer Green's function modelling

Du, X. & Pan, J., 1 Jan 2017, INTER-NOISE 2017 - 46th International Congress and Exposition on Noise Control Engineering: Taming Noise and Moving Quiet. United States: Institute of Noise Control Engineering, p. 1538-1545

Research output: Chapter in Book/Conference paperConference paper

transformers
Green's functions
genetic algorithms
frequency response
set theory
2016
2 Citations (Scopus)

A Modelling Ecosystem for Prognostics

Astfalck, L. C., Hodkiewicz, M. J., Keating, A., Cripps, E. J. & Pecht, M., 2016, Proceedings of the Annual Conference of the Prognostics and Health Management Society 2016. Larsen, D. & Reichard, K. (eds.). United States: Prognostics and Health Management Society, p. 273-281 9 p.

Research output: Chapter in Book/Conference paperConference paper

ecosystem modeling
ecosystem
communication
industry
2014
1 Citation (Scopus)

Testing periodic local position invariance using long-term comparison of the SYRTE atomic fountains and H-masers

Tobar, M. E., Stanwix, P. L., McFerran, J. J., Guena, J., Abgrall, M., Bize, S., Clairon, A., Laurent, P., Rosenbusch, P., Rovera, D. & Santarelli, G., 2014, Proceedings of the 6th Meeting on CPT and Lorentz Symmetry, CPT 2013. Kostelecky, V. A. (ed.). USA: World Scientific Publishing, p. 37-40 4 p. (Proceedings of the 6th Meeting on CPT and Lorentz Symmetry, CPT 2013).

Research output: Chapter in Book/Conference paperConference paper

masers
acceleration (physics)
invariance
coefficients
gravitational fields
2013

Dynamic Mechanical Spectroscopy of Nanograined Thin NiTi Wires

Alonso, T., Favier, D., Chagnon, G., Sittner, P. & Liu, Y., 2013, SMST-2013 Proceedings of the International Conference on Shape Memory and Superelastic Technologies. USA: ASM International, p. 195-196

Research output: Chapter in Book/Conference paperConference paper

elastic properties
wire
spectroscopy
modulus of elasticity
spectral mixture analysis

NiTi-Nb in-situ Nanowire Composite: Extending the Boundaries of Materials Elastic Strain Limit, Young’s Modulus and Strength

Hao, S., Cui, L., Jiang, D., Liu, Z., Jiang, J., Mao, S., Ren, Y., Liu, Y., Ding, X., Ren, X. & Li, J., 2013, SMST-2013 Proceedings of the International Conference on Shape Memory and Superelastic Technologies. USA: ASM International

Research output: Chapter in Book/Conference paperConference paper

modulus of elasticity
nanowires
composite materials
mechanical properties
yield strength
2012

Experimental and numerical study of NiTi holley plates loaded in tension

Cellard, C., Rio, G., Samsam Shariat, B., Liu, Y., Grolleau, V., Delobelle, V. & Favier, D., 2012, European Symposium on Martensitic Transformations ESOMAT 2012: selected, peer reviewed papers from the 9th European Symposium on Martensitic Transformations. Prokoshkin, S. & Resnina, N. (eds.). Trans Tech Publications, (Materials Science Forum; vol. 738-739).

Research output: Chapter in Book/Conference paperConference paper

2011

Etude expérimentale du comportement d'une tôle perforée aléatoirement en NiTi superélastique

Cellard, C., Samsam Shariat, B., Rio, G., Grolleau, V., Liu, Y. & Collin, A., 2011, 20ème Congrès Français de Mécanique [CFM2011]. France: AFM, Maison de la Mécanique

Research output: Chapter in Book/Conference paperConference paper

Open Access

Modélisation numérique EF du comportement mécanique superélastique de plaques fines planes trouées en NiTi

Samsam Shariat, B., Liu, Y., Rio, G. & Favier, D., 2011, 20ème Congrès Français de Mécanique [CFM2011]. AFM, Maison de la Mécanique

Research output: Chapter in Book/Conference paperConference paper

Open Access
2010

Reactive ion etching of porous silicon for MEMS applications

Lai, M. F., Parish, G., Liu, Y. N. & Keating, A. J., 2010, Proceedings of 2010 Conference on Optoelectronic and Microelectronic Materials and Devices. USA: IEEE, Institute of Electrical and Electronics Engineers, p. 169-170 2 p. (Conference on Optoelectronic and Microelectronic Materials and Devices).

Research output: Chapter in Book/Conference paperConference paper

porous silicon
microelectromechanical systems
etching
ions
gas mixtures
2009

Elastohysteresis : un modèle 3D phénoménologique précis pour le comportement superélastique d’Alliage à Mémoire de Forme sous chargements complexes

Rio, G., Favier, D. & Liu, Y., 2009, 19ème Congrès Français de Mécanique. AFM, Maison de la Mécanique

Research output: Chapter in Book/Conference paperConference paper

2008

Complementary Michelson-Morley experiments: Coordinate and field redefinitions

Müller, H., Stanwix, P. L., Tobar, M. E. E., Ivanov, E., Wolf, P., Herrmann, S., Senger, A., Kovalchuk, E. & Peters, A., 2008, Proceedings of the 4th Meeting on CPT and Lorentz Symmetry, CPT 2007. Bloomington, IN; United States, Vol. 1. p. 302-304 3 p.

Research output: Chapter in Book/Conference paperConference paper

sectors
photons
electrons
protons
2 Citations (Scopus)

Effect of heat treatment on internal stresses in PECVD SiN xHy thin films

Yang, Y., Liu, Y. & Delf, J. M., 1 Dec 2008, Proceedings of the 2008 Conference on Optoelectronic and Microelectronic Materials and Devices, COMMAD'08. p. 181-184 4 p. 4802121. (Conference on Optoelectronic and Microelectronic Materials and Devices, Proceedings, COMMAD).

Research output: Chapter in Book/Conference paperConference paper

Plasma enhanced chemical vapor deposition
Residual stresses
Heat treatment
Heating
Thin films
2006

Thermal Stability of PECVD SiN/sub x/ Films: 2006 International Conference on Nanoscience and Nanotechnology

Jehanathan, N., Liu, Y., Walmsley, B., Dell, J. & Faraone, L., 2006, Proceedings of 2006 International Conference on Nanoscience and Nanotechnology ICONN 2006. IEEE, Institute of Electrical and Electronics Engineers, p. 76-79

Research output: Chapter in Book/Conference paperConference paper

nanotechnology
thermal stability
nanoindentation
oxidation
scanning electron microscopy
2005

Thermal processing of polycrystalline NiTi shape memory alloys

Frick, C. P., Ortega, A., Tyber, J., Gall, K., Maier, H. J., Maksound, A. E. M. & Liu, Y., 2005, Medical Device Materials II: Proceedings of Materials and Processes for Medical Devices 2004. Helmus, M. & Medlin, D. (eds.). ASM International, p. 32-37

Research output: Chapter in Book/Conference paperConference paper

shape memory alloys
heat treatment
precipitates
martensite
cold drawing
1990

Effect of a low molecular weight plasticizer on the electrical and transport properties of zinc polymer electrolytes

Yang, H. & Farrington, G. C. C., 1990, Proceedings of the Second International Symposium on Polymer Electrolytes. Netherlands, Vol. N/A. p. 265-272 8 p.

Research output: Chapter in Book/Conference paperConference paper

Investigation of morphology and ion-polymer Interactions in Zn(II) polymer electrolytes using thermal analysis

Yang, H., McGhie, A. R. R. & Farrington, G. C. C., 1990, Proceedings of the 19th North American Thermal Analysis Society Conference. USA, Vol. N/A. p. 221-227 7 p.

Research output: Chapter in Book/Conference paperConference paper

The degree of crystallinity in PEO-based electrolytes

Wendsjo, A. & Yang, H., 1990, Proceedings of the Second International Symposium on Polymer Electrolytes. Netherlands, Vol. N/A. p. 225-237 13 p.

Research output: Chapter in Book/Conference paperConference paper

1989

Constitutive modelling of shape memory behaviour

Liu, Y. & McCormick, P., 1989, Advances in Constitutive Laws for Engineering Materials: Proceedings of International Conference on Constitutive Laws for Engineering Materials. Jinghong, F. & Murakami, S. (eds.). Bejing: International Academic Publishers, p. 460-465

Research output: Chapter in Book/Conference paperConference paper

Peo-Based Polymer Electrolytes Containing Divalent Cations

Farrington, G. C. C., Yang, H. & Hug, R., 1989, Materials Research Society Symposium Proceedings. UK, Vol. 135. p. 319 319 p.

Research output: Chapter in Book/Conference paperConference paper