Faculty of Engineering and Mathematical Sciences

Research Output 1959 2019

Filter
Conference presentation/ephemera
2019
2018

An investigation into the nonlinear vibration response of a beam: PZT stack and proof-mass system

Jiang, X. & Pan, J., 1 Jan 2018.

Research output: Contribution to conferenceConference presentation/ephemera

vibration
excitation
hysteresis
structural vibration
causes

Controlling sound radiation through openings with an active noise control system at the edge

Wang, S., Tao, J., Qiu, X. & Pan, J., 1 Jan 2018.

Research output: Contribution to conferenceConference presentation/ephemera

acoustics
radiation
microphones
Huygens principle
ventilation

Control of In-Plane and Out-Of-Plane Stress in MEMS devices built from Porous Silicon

Afandi, Y., Sun, X., Parish, G. & Keating, A., 2018.

Research output: Contribution to conferenceConference presentation/ephemera

Extended finite element modelling of fracture propagation during in-situ rock mass alteration

Dong, X., Karrech, A., Basarir, H. & Elchalakani, M., 1 Jan 2018.

Research output: Contribution to conferenceConference presentation/ephemera

fracture propagation
Rocks
rocks
propagation
rock

Generalized joint sparse representation for multimodal biometric fusion of heterogeneous features

Primorac, R., Togneri, R., Bennamoun, M. & Sohel, F., 2018.

Research output: Contribution to conferenceConference presentation/ephemera

2 Downloads (Pure)

Nitrogen annealing effect on resistivity of porous silicon

Sun, X., 2018.

Research output: Contribution to conferenceConference presentation/ephemera

File
porous silicon
nitrogen
electrical resistivity
annealing
silicon films

Properties of Large-scale Geological Features and Seismic Responses Affecting Strainburst Potential in Deep Underground Mines

Goulet, A., Grenon, M., Woodward, K., Wesseloo, J. & Morissette, P., Nov 2018. 12 p.

Research output: Contribution to conferenceConference presentation/ephemera

geological feature
seismic response
spalling
rockburst
safety

Pulsed heating effect on porous silicon and measurement of thermal time constant

Sun, X., Parish, G. & Keating, A., 2018.

Research output: Contribution to conferenceConference presentation/ephemera

porous silicon
time constant
heating
electric potential
silicon films

Released all-porous-silicon microstructure for spectrometer applications

Sun, X., Afandi, Y., Parish, G. & Keating, A., 2018.

Research output: Contribution to conferenceConference presentation/ephemera

porous silicon
spectrometers
microstructure
plane stress
silicon films
37 Downloads (Pure)

Resonance of Optically Driven Nano-porous Silicon Microbeams

Sun, X., Parish, G., Afandi, Y. & Keating, A., 2018.

Research output: Contribution to conferenceConference presentation/ephemera

File
microbeams
porous silicon
resonant frequencies
actuation

The application of numerically-derived ocean wave spectra to floating bodies

Milne, I. A. & Zed, M., 2018.

Research output: Contribution to conferenceConference presentation/ephemera

The effect of hydrostatic loading on the vibration response of a plate: Investigative study

Saltmarsh, K., Pan, J. & Matthews, D., 1 Jan 2018.

Research output: Contribution to conferenceConference presentation/ephemera

hydrostatics
vibration
fluids
circular plates
sound fields

Using Current Density to Control Stress and Porosity in Porous Silicon Fabrication

Afandi, Y., Sun, X., Parish, G. & Keating, A., 2018.

Research output: Contribution to conferenceConference presentation/ephemera

Using Current Density to Control Stress and Porosity in Porous Silicon Fabrication

Afandi, Y., Sun, X., Parish, G. & Keating, A., 2018.

Research output: Contribution to conferenceConference presentation/ephemera

Water for the Twenty First Century, Can Small Solutions Help Tackle One of the Biggest Problems Facing Humanity?

Ghadouani, A., 3 Apr 2018.

Research output: Contribution to conferenceConference presentation/ephemera

2017

A fundamental thermodynamic assessment of thermal vs reverse-osmosis seawater desalination

Gordon, J. & Chua, H. T., 2017. 11 p.

Research output: Contribution to conferenceConference presentation/ephemera

Bearing capacities of spudcan foundations in clay after penetrating through a sand layer

Hu, P., Bienen, B. & Cassidy, M. J., 2017.

Research output: Contribution to conferenceConference presentation/ephemera

bearing capacity
centrifuge
clay
sand
stratigraphy
20 Citations (Scopus)

Effectiveness of skirted spudcans in mitigating punch-through in sand-over-clay deposits

Lee, J. M., Kim, Y., Hossain, M. S., Cassidy, M. J., Hu, Y. & Sim, J. U., 2017, p. 956-962.

Research output: Contribution to conferenceConference presentation/ephemera

Effects of consolidation on the undrained combined VHM capacity of spudcans

Ragni, R., Bienen, B., Cassidy, M. J., Mašín, D. & Wang, D., 2017.

Research output: Contribution to conferenceConference presentation/ephemera

Effects of lateral cycling of monopiles in soft clay

Doherty, J., Lehane, B. & Truong, P., 2017.

Research output: Contribution to conferenceConference presentation/ephemera

Cyclic loads
Kaolin
Centrifuges
Wind turbines
Piles

General report for technical session TC102: In-Situ testing

Monaco, P., Da Fonseca, A. V., DeJong, J. & Lehane, B., 1 Jan 2017, p. 551-558. 8 p.

Research output: Contribution to conferenceConference presentation/ephemera

Testing
site characterization
Monitoring
in situ
monitoring

Physical and numerical modelling of novel spudcans for easing footprintspudcan interaction issues

Jun, M., Kim, Y., Hossain, M. S., Cassidy, M. J., Hu, Y. & Sim, J., 2017.

Research output: Contribution to conferenceConference presentation/ephemera

RiverLab: Using the Swan River as a large wave basin and ocean analogue for innovative offshore engineering

Milne, I. & Draper, S., 2017.

Research output: Contribution to conferenceConference presentation/ephemera

Three-dimensional soil-SCR interaction coupled with global SCR analysis

Choi, J., Jang, B-S., Kim, J. D., Kim, Y. H. & Hossain, M. S., 2017, p. 85-89.

Research output: Contribution to conferenceConference presentation/ephemera

2016

Characterization of vertical mixing in oscillatory vegetated flows

Abdolahpour, M., Ghisalberti, M., Lavery, P. S. & McMahon, K. M., 2016.

Research output: Contribution to conferenceConference presentation/ephemera

oscillating flow
vertical mixing
canopy
seagrass meadow
diffusivity

Direct numerical simulation of three-dimensional flow past a yawed square cylinder in steady current

Lou, X., Zhou, T. & Cheng, L., 2016.

Research output: Contribution to conferenceConference presentation/ephemera

Integrated piezocone penetrometer with a jackup rig for site-specific assessment: CPTu data interpretation and spudcan penetration analysis

Safinus, S., Cassidy, M., Hossain, M., Randolph, M., Quah, M. & Perry, M., 2016.

Research output: Contribution to conferenceConference presentation/ephemera

Micromachining to achieve low stress in sacrificial layer free, all-porous silicon microstructures

Sun, X., Keating, A. & Parish, G., 2016.

Research output: Contribution to conferenceConference presentation/ephemera

Muffler design by sub-chamber optimization: with application to a mining truck muffler

Yu, X., Tong, Y., Cheng, L. & Pan, J., 2016. 10 p.

Research output: Contribution to conferenceConference presentation/ephemera

mufflers
trucks
chambers
transmission loss
optimization

Nano-porous silicon stress study during microstructure fabrication processes

Sun, X., Keating, A. & Parish, G., 2016.

Research output: Contribution to conferenceConference presentation/ephemera

Simultaneous measurements of turbulent energy and temperatire dissipation rates in the far field of a slightly heated cylinder wake

Hao, Z. & Zhou, T., 2016.

Research output: Contribution to conferenceConference presentation/ephemera

The influence of pile diameter on the relationship between the unit shaft friction of bored piles in sand and the CPT end resistance

Doan, V. L. & Lehane, B., 2016.

Research output: Contribution to conferenceConference presentation/ephemera

The influence of pile diameter on the relationship between the unit shaft fri ction of bored piles in sand and the CPT end resistance

Doan, V. L. & Lehane, B., 2016, p. 213. 218 p.

Research output: Contribution to conferenceConference presentation/ephemera

Yield Stress-microstructure of Washed TiO2 Suspensions at the Point of Zero Charge

Au, P. I., Liu, J. & Leong, Y-K., 2016.

Research output: Contribution to conferenceConference presentation/ephemera

fractals
microstructure
oxides
exponents
scanning electron microscopy
2015

Modelling the effects of pauses during spudcan penetration on the further installation behaviour

Ragni, R., Bienen, B., Wang, D. & Cassidy, M., 2015.

Research output: Contribution to conferenceConference presentation/ephemera

consolidation
penetration
pore pressure
modeling
jack up platform
2013
3 Citations (Scopus)

Evaluation of the performance of a CPT-based correlation to predict spudcan penetration using field data

Edwards, D., Bienen, B., Pucker, T. & Henke, S., 2013.

Research output: Contribution to conferenceConference presentation/ephemera

On the VHM capacity of a buried spudcan in soft clay as it relates to the new ISO 19905-1 guidelines

Zhang, Y., Bienen, B. & Cassidy, M. K., 2013.

Research output: Contribution to conferenceConference presentation/ephemera

Clay
Jacks
Bearing capacity
Soils
Scour

Recent Advances in the Centrifuge Modelling of Offshore Foundations

Cassidy, M., Tian, Y., O'Loughlin, C., Gaudin, C. & Bienen, B., 2013.

Research output: Contribution to conferenceConference presentation/ephemera

Centrifuges
Gravitation
Offshore pipelines
Anchors
Accelerometers
2012
life-span

Mechanical behaviour of architectured NiTi materials in complex loading: CIMTEC

Favier, D., Alonso, T., Chagnon, G., Delobelle, V., Louche, H., Machado, G., Waltz, L., Rio, G. & Liu, Y., 2012.

Research output: Contribution to conferenceConference presentation/ephemera

Constitutive equations
Spark cutting
Topology
Resistance welding
Acoustic impedance

Predictive Model for Drag Embedment Anchor Performance in Clay Seabed

Beemer, R. D., Aubeny, C. P., Randall, R. & Drake, A., 2012. 8 p.

Research output: Contribution to conferenceConference presentation/ephemera

Anchors
Drag
Clay
Mooring
2011

Behavior of monopile foundations under static and cyclic loads

Kim, Y., Jeong, S. & Kim, Y., 2011, p. 43-48.

Research output: Contribution to conferenceConference presentation/ephemera

Comparison of creep prediction models for self-compacting and conventional concrete

Aslani, F. & Nejadi, S., 2011.

Research output: Contribution to conferenceConference presentation/ephemera

Self compacting concrete
Creep
Concretes
Concrete construction
Binders

Comparison of shrinkage prediction models for self-compacting and conventional concrete

Aslani, F. & Nejadi, S., 2011.

Research output: Contribution to conferenceConference presentation/ephemera

Evaluation and comparison of the analytical models to determine tensile strength of self-compacting concrete and conventional concrete

Aslani, F. & Nejadi, S., 2011, p. 1-11.

Research output: Contribution to conferenceConference presentation/ephemera

Self compacting concrete
Analytical models
Tensile strength
Concretes
Punching

Experimental studies on flow structures of a turbulent wake generated by a circular cylinder attached with helical strakes

Zhou, T., Hao, Z., Wang, X. K. & Tan, S. K., 2011.

Research output: Contribution to conferenceConference presentation/ephemera

Studies on the suppression of vortex-induced vibrations using vortex generators

Hao, Z., Zhou, T., Salehi, A. & Yu, H., 2011.

Research output: Contribution to conferenceConference presentation/ephemera

2010
8 Citations (Scopus)

A new approach to aircraft surface inspection based on directional energies of texture: 2010 20th International Conference on Pattern Recognition

Mumtaz, M., Mansoor, A. B. & Masood, H., 2010, p. 4404-4407. 4 p.

Research output: Contribution to conferenceConference presentation/ephemera